标签：CTL0 clock RCU CFG0 STM32 GD32 PLL HXTAL 时钟

以GD32E230为例。

启动文件：startup_gd32e230x.s 中的代码：

系统初始化代码：

void SystemInit (void)
{
    /* enable IRC8M */
    RCU_CTL0 |= RCU_CTL0_IRC8MEN;
    while(0U == (RCU_CTL0 & RCU_CTL0_IRC8MSTB)){
    }
    /* reset RCU */
    RCU_CFG0 &= ~(RCU_CFG0_SCS | RCU_CFG0_AHBPSC | RCU_CFG0_APB1PSC | RCU_CFG0_APB2PSC |\
                  RCU_CFG0_ADCPSC | RCU_CFG0_CKOUTSEL | RCU_CFG0_CKOUTDIV | RCU_CFG0_PLLDV);
    RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PLLMF | RCU_CFG0_PLLMF4 | RCU_CFG0_PLLDV);
    RCU_CTL0 &= ~(RCU_CTL0_HXTALEN | RCU_CTL0_CKMEN | RCU_CTL0_PLLEN | RCU_CTL0_HXTALBPS);
    RCU_CFG1 &= ~(RCU_CFG1_PREDV);
    RCU_CFG2 &= ~(RCU_CFG2_USART0SEL | RCU_CFG2_ADCSEL);
    RCU_CFG2 &= ~RCU_CFG2_IRC28MDIV;
    RCU_CFG2 &= ~RCU_CFG2_ADCPSC2;
    RCU_CTL1 &= ~RCU_CTL1_IRC28MEN;
    RCU_INT = 0x00000000U;

    /* configure system clock */
    system_clock_config();
    
#ifdef VECT_TAB_SRAM
    nvic_vector_table_set(NVIC_VECTTAB_RAM,VECT_TAB_OFFSET);
#else
    nvic_vector_table_set(NVIC_VECTTAB_FLASH,VECT_TAB_OFFSET);
#endif
}

系统时钟配置函数：

static void system_clock_config(void)
{
#ifdef __SYSTEM_CLOCK_8M_HXTAL
    system_clock_8m_hxtal();
#elif defined (__SYSTEM_CLOCK_72M_PLL_HXTAL)
    system_clock_72m_hxtal();
#elif defined (__SYSTEM_CLOCK_72M_PLL_IRC8M_DIV2)
    system_clock_72m_irc8m();
#elif defined (__SYSTEM_CLOCK_72M_PLL_IRC48M_DIV2)
    system_clock_72m_irc48m();
#else
    system_clock_8m_irc8m();
#endif /* __SYSTEM_CLOCK_8M_HXTAL */
}

　　根据不同的时钟源宏定义（选择不同的时钟源及频率），调用不同的函数，以选择system_clock_72m_hxtal()为例：

static void system_clock_72m_hxtal(void)
{
    uint32_t timeout = 0U;
    uint32_t stab_flag = 0U;

    /* enable HXTAL */
    RCU_CTL0 |= RCU_CTL0_HXTALEN;

    /* wait until HXTAL is stable or the startup time is longer than HXTAL_STARTUP_TIMEOUT */
    do{
        timeout++;
        stab_flag = (RCU_CTL0 & RCU_CTL0_HXTALSTB);
    }
    while((0U == stab_flag) && (HXTAL_STARTUP_TIMEOUT != timeout));
    /* if fail */
    if(0U == (RCU_CTL0 & RCU_CTL0_HXTALSTB)){
        while(1){
        }
    }
    
    FMC_WS = (FMC_WS & (~FMC_WS_WSCNT)) | WS_WSCNT_2;   // WFY增加2个等待状态
    
    /* HXTAL is stable */
    /* AHB = SYSCLK */
    RCU_CFG0 |= RCU_AHB_CKSYS_DIV1;
    /* APB2 = AHB */
    RCU_CFG0 |= RCU_APB2_CKAHB_DIV1;
    /* APB1 = AHB */
    RCU_CFG0 |= RCU_APB1_CKAHB_DIV1;

    /* PLL = HXTAL * 9 = 72 MHz */
    RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PLLMF | RCU_CFG0_PLLDV);
    RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL9);
    
//    /* PLL = HXTAL * 6 = 72 MHz   AAA */
//    RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PLLMF | RCU_CFG0_PLLDV);
//    RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL6);
    

    /* enable PLL */
    RCU_CTL0 |= RCU_CTL0_PLLEN;

    /* wait until PLL is stable */
    while(0U == (RCU_CTL0 & RCU_CTL0_PLLSTB)){
    }

    /* select PLL as system clock */
    RCU_CFG0 &= ~RCU_CFG0_SCS;
    RCU_CFG0 |= RCU_CKSYSSRC_PLL;

    /* wait until PLL is selected as system clock */
    while(0U == (RCU_CFG0 & RCU_SCSS_PLL)){
    }
}

　函数选择的是 :HXTAL =8MH在

标签：CTL0,clock,RCU,CFG0,STM32,GD32,PLL,HXTAL,时钟
来源： https://www.cnblogs.com/wfy680/p/14635743.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。