静态综合

2021-01-13 23:05:59 阅读：181 来源： 互联网

标签：ad R3 静态 ip GigabitEthernet0 192.168 int 综合

在这里插入图片描述 R1

[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip ad 192.168.1.1 30
Jan 13 2021 22:20:11-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]
[R1-GigabitEthernet0/0/1]
[R1-GigabitEthernet0/0/1]ip ad 192.168.1.5 30
Jan 13 2021 22:20:30-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R1-GigabitEthernet0/0/1]q
[R1]int lo 1
[R1-LoopBack1]
[R1-LoopBack1]ip ad 192.168.1.129 29
[R1-LoopBack1]int lo 2
[R1-LoopBack2]ip ad 192.168.1.137 29
[R1-LoopBack2]

[R2]int g 0/0/0
[R2-GigabitEthernet0/0/0]ip ad 192.168.1.2 30
Jan 13 2021 22:21:48-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R2-GigabitEthernet0/0/0]
[R2-GigabitEthernet0/0/0]int g 0/01
                               ^
Error: Unrecognized command found at '^' position.
[R2-GigabitEthernet0/0/0]int g 0/0/1
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]ip ad 192.168.1.9 30
Jan 13 2021 22:22:23-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]
[R2-GigabitEthernet0/0/1]int lo 1
[R2-LoopBack1]ip ad 192.168.1.145 29
[R2-LoopBack1]
[R2-LoopBack1]
[R2-LoopBack1]int lo 2
[R2-LoopBack2]ip ad 192.168.1.153 29
[R2-LoopBack2]

[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip ad 192.168.1.161 28
[R3-GigabitEthernet0/0/0]
Jan 13 2021 22:23:53-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]undo ip ad 192.168.1.161 28
Jan 13 2021 22:24:44-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the DOWN state. 
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]
[R3-GigabitEthernet0/0/0]ip ad 192.168.1.6 30
[R3-GigabitEthernet0/0/0]
Jan 13 2021 22:25:48-08:00 R3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R3-GigabitEthernet0/0/0]int g0/0/1
[R3-GigabitEthernet0/0/1]ip ad 192.168.1.14 30
Jan 13 2021 22:26:18-08:00 R3 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R3-GigabitEthernet0/0/1]int g 0/0/2
[R3-GigabitEthernet0/0/2]
[R3-GigabitEthernet0/0/2]
[R3-GigabitEthernet0/0/2]ip ad 192.168.1.161 28
Jan 13 2021 22:26:47-08:00 R3 %%01IFNET/4/LINK_STATE(l)[4]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[R3-GigabitEthernet0/0/2]
[R3-GigabitEthernet0/0/2]q
[R3]dh	
[R3]dhcp en	
[R3]dhcp enable 
Info: The operation may take a few seconds. Please wait for a moment.done.
[R3]int g	
[R3]int GigabitEthernet 0/0/2
[R3-GigabitEthernet0/0/2]dhcp se	
[R3-GigabitEthernet0/0/2]dhcp select g	
[R3-GigabitEthernet0/0/2]dhcp select global 
[R3-GigabitEthernet0/0/2]q
[R3]ip po 0
Info: It's successful to create an IP address pool.
[R3-ip-pool-0]net	
[R3-ip-pool-0]netbios-type
[R3-ip-pool-0]network 192.168.1.160 mask 28
[R3-ip-pool-0]
[R3-ip-pool-0]gate	
[R3-ip-pool-0]gateway-list 192.168.1.161
[R3-ip-pool-0]dns-list 4.4.4.4
[R3-ip-pool-0]q

[R4]int g 0/0/0
[R4-GigabitEthernet0/0/0]ip ad 192.168.1.10 30
Jan 13 2021 22:31:15-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R4-GigabitEthernet0/0/0]int g0/0/1
[R4-GigabitEthernet0/0/1]
[R4-GigabitEthernet0/0/1]ip ad 192.168.1.13 30
Jan 13 2021 22:31:37-08:00 R4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R4-GigabitEthernet0/0/1]int	
[R4-GigabitEthernet0/0/1]int g0/0/2
[R4-GigabitEthernet0/0/2]ip ad 192.168.1.17 30
Jan 13 2021 22:32:20-08:00 R4 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[R4]int g4/0/0
[R4-GigabitEthernet4/0/0]ip ad 192.168.1.13
                                            ^
Error:Incomplete command found at '^' position.
[R4-GigabitEthernet4/0/0]ip ad 192.168.1.21 30
[R4-GigabitEthernet4/0/0]
Jan 13 2021 22:37:45-08:00 R4 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet4/0/0 has entered the UP state. 
[R4-GigabitEthernet4/0/0]int lo 1
[R4-LoopBack1]ip ad 192.168.1.177 28
[R4-LoopBack1]

[R5]int g0/0/0
[R5-GigabitEthernet0/0/0]
[R5-GigabitEthernet0/0/0]ip ad 192.168.1.18 30
[R5-GigabitEthernet0/0/0]int g0/0/1
[R5-GigabitEthernet0/0/1]ip ad 183.1.1.1 24
[R5-GigabitEthernet0/0/1]int g0/0/2
[R5-GigabitEthernet0/0/2]
[R5-GigabitEthernet0/0/2]ip ad 192.168.1.22 30
Jan 13 2021 22:40:19-08:00 R5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state. 
[R5-GigabitEthernet0/0/2]
[R5-GigabitEthernet0/0/2]int lo 1
[R5-LoopBack1]ip ad 192.168.1.177 28

[R6]int g0/0/0
[R6-GigabitEthernet0/0/0]ip ad 183.1.1.2 24
[R6-GigabitEthernet0/0/0]
Jan 13 2021 22:41:21-08:00 R6 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R6-GigabitEthernet0/0/0]int lo1
[R6-LoopBack1]
[R6-LoopBack1]ip ad 184.1.1.1 24
[R6-LoopBack1]

标签：ad,R3,静态,ip,GigabitEthernet0,192.168,int,综合
来源： https://blog.csdn.net/weixin_53176674/article/details/112596575

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。

ICode9

静态综合