标签:Core SW 华为 交换机 SSH test ssh user
1、创建本地密钥对
[Core-SW]rsa local-key-pair create
The key name will be: Core-SW_Host
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
it will take a few minutes.
Input the bits in the modulus[default = 2048]:
Generating keys…
…+++++
…++
…++++
…++
2、检查是否存在SSH user(可跳过),系统提示没有SSH user 存在
[Core-SW]dis ssh user-information
Info: No SSH user exists.
3、创建SSH user
[Core-SW]ssh user test \可以直接敲第二行命令
[Core-SW]ssh user test authentication-type password \认证模式为密码认证
[Core-SW]ssh user test service-type stelnet \服务类型为stelnet,即SSH
4、创建用户
[Core-SW]aaa
[Core-SW-aaa]local-user test password cipher xxx(xxx处为你想要设置的密码)
Info: Add a new user.
[Core-SW-aaa]local-user test privilege level 3 \用户level最高到15
[Core-SW-aaa]local-user test service-type ?
8021x 802.1x user
bind Bind authentication user
ftp FTP user
http Http user
ppp PPP user
ssh SSH user
telnet Telnet user
terminal Terminal user
web Web authentication user
x25-pad X25-pad user
[Core-SW-aaa]local-user test service-type ssh \开启该用户允许使用SSH访问设备的权限
5、启用SSH(stelnet)服务
[Core-SW]stelnet server enable
Info: Succeeded in starting the Stelnet server.
6、配置vty界面支持的登录协议
[Core-SW]user-interface vty 0 4
[Core-SW-ui-vty0-4]authentication-mode aaa
[Core-SW-ui-vty0-4]protocol inbound ssh
本文来自51CTO博客作者舞文泼墨的原创作品
标签:Core,SW,华为,交换机,SSH,test,ssh,user 来源: https://www.cnblogs.com/magita/p/13625910.html
本站声明: 1. iCode9 技术分享网(下文简称本站)提供的所有内容,仅供技术学习、探讨和分享; 2. 关于本站的所有留言、评论、转载及引用,纯属内容发起人的个人观点,与本站观点和立场无关; 3. 关于本站的所有言论和文字,纯属内容发起人的个人观点,与本站观点和立场无关; 4. 本站文章均是网友提供,不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属;如您发现该文章侵犯了您的权益,可联系我们第一时间进行删除; 5. 本站为非盈利性的个人网站,所有内容不会用来进行牟利,也不会利用任何形式的广告来间接获益,纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。