标签：Control plot SET reference 0.05 Mechatronic cog time output

Advanced Mechatronic Control HOMEWORK SET 4 SUMMER 2019
OUT: 06/19/19 DUE: 07/10/19
PROBLEM #1 (100 points)
Let us consider the linear motor dynamics with the effect of Coulomb friction, cogging forces, and
external disturbance, i.e.,
where Asc is the magnitude of the Coulomb friction with Sy ky k ( ) sat , 1000, and
1 3 and Acog cog A are the unknown magnitudes of cogging forces, P ? 0.06 m is the known distance
between two adjacent magnets, and d t( ) represents the lumped external disturbance forces which is
assumed to be bounded by () 2 M dt d . Due to the large variations of the inertia load that the linear
motor can carry and the friction and cogging force characteristics, the exact values of , , Me B , Asc
1 3 and Acog cog A may not be known. However, through the specifications of the linear motor, the

linear motor dynamics作业代做、代写Coulomb friction作业、代写Python/Java
variation ranges of these parameters are known and given by
A. First consider the situation of constant external disturbances, i.e., assuming 0 dt d t () . Design
an adaptive controller that achieves closed-loop stability and asymptotic output tracking (i.e.
() () () y m e t yt y t converges to zero asymptotically) for the linear motor described (H1) and (H2).
To receive full credit, you need to provide the detailed proof step by step.
B. Let the reference output be the output of a reference model given by
(H4)
in which the reference command input c u is a square wave type reference command with a half
period of 0.6 sec representing a back-forth movement of travel distance of 0.2m. Assuming a
sampling rate of 2kHz and using the Euler’s approximation algorithm, discretize the continuous
adaptive control law in part A. The initial values for the controller and estimator parameters
should be chosen according to the initial estimates of (0) 0.055 Me ,
B(0) 0.225 , (0) 0.125 Asc , 1 (0) 0.03 Acog and 3 (0) 0.03 Acog . Simulate the adaptive control law with the
continuous plant (H1) for the following two sets of actual values for the linear motor:
Case 1: 1 30 0.025, 0.1, 0.1, 0.01, 0.05, 1 M BA A A d e sc cog cog
Case 2: 1 30 0.085, 0.35, 0.15, 0.05, 0.05, 1 M BA A A d e sc cog cog
The total simulation time is 4 seconds. Obtain the following time plots:
(i) A plot showing the reference command input c u , the reference output my , and the actual
output y .
(ii) A plot showing the output tracking error m eyy .
(iii) A plot showing the control input u.
(iv) A plot showing the parameter estimates and their actual values.
C. To see how well your adaptive controller can handle time-varying external disturbance, obtain the
simulation results of your adaptive controller for the following two sets of actual values for the
linear motor:
Case 3: round 10 sin(20 )
1 3 0.025, 0.1, 0.1, 0.01, 0.05, ( ) 1 ( 1) t t M B A A A dt e sc cog cog
Case 4: round 10 sin(20 )
1 3 0.085, 0.35, 0.15, 0.05, 0.05, ( ) 1 ( 1) t t M B A A A dt e sc cog
Consider the same linear motor system as in Problem 1.

D. Design a deterministic robust control (DRC) law that achieves a guaranteed transient and steadystate
tracking performance. To receive full credit, you need to provide the detailed proof step by
step.

E. Obtain the simulation results of your DRC controller for the same situations as in part C of Problem
1. Compare the results with those of AC controller in Problem 1.
PROBLEM #3 (100 points)
Consider the same linear motor system as in Problem 1.
F. Synthesize an adaptive robust controller (ARC) that achieves a guaranteed transient and steadystate
tracking performance in general, and asymptotic output tracking (i.e., () () () y m e t y t y t
converges to zero asymptotically) for constant external disturbances of 0 dt d t (). To receive
full credit, you need to provide the detailed proof as well.
G. Let the reference output be the output of a reference model given by
(H4)
in which the reference command input c u is a square wave type reference command with a half
period of 0.6 sec representing a back-forth movement of travel distance of 0.2m. Assuming a
sampling rate of 2kHz and using the Euler’s approximation algorithm, discretize the continuous
adaptive control law in part A. The initial values for the controller and estimator parameters
should be chosen according to the initial estimates of (0) 0.055 Me,
d (0) 0 . Simulate the ARC control law with
with the continuous plant (H1) for the following sets of actual values for the linear motor:
Case 1: 1 30 0.025, 0.1, 0.1, 0.01, 0.05, 1 M BA A A d e sc cog cog
Case 2: 1 30 0.085, 0.35, 0.15, 0.05, 0.05, 1 M BA A A d e sc cog cog
Case 3: round 10 sin(20 )
1 3 0.025, 0.1, 0.1, 0.01, 0.05, ( ) 1 ( 1) t t M B A A A dt e sc cog cog
Case 4: round 10 sin(20 )
1 3 0.085, 0.35, 0.15, 0.05, 0.05, ( ) 1 ( 1) t t M B A A A dt e sc cog
The total simulation time is 4 seconds. Obtain the following time plots:
(v) A plot showing the reference command input c u , the reference output my , and the actual
output y .
(vi) A plot showing the output tracking error m eyy.
(vii) A plot showing the control input u.
(viii) A plot showing the parameter estimates and their actual values.
PROBLEM #4 (100 points)
H. Optimize the performance of the ARC in B using the automated gain tuning procedure outlined in
the lecture notes. To receive full credit, you need to provide the detailed procedure and
justification as well. Obtain the simulation results for Cases 1-4 and compare them with those in
B.
PROBLEM #5 (100 points)
Consider the same linear motor system as in Problem 1.
I. Synthesize an indirect adaptive robust controller (IARC) that achieves a guaranteed transient
and steady-state tracking performance in general, and asymptotic output tracking (i.e., converges to zero asymptotically) for constant external disturbances of
0 dt d t (). To receive full credit, you need to provide the detailed designs and proof as well.
J. Let the reference output be the output of a reference model given by
(H4)
in which the reference command input c u is a square wave type reference command with a half
period of 0.6 sec representing a back-forth movement of travel distance of 0.2m. Assuming a
sampling rate of 2kHz and using the Euler’s approximation algorithm, discretize the continuous
adaptive control law in part A. The initial values for the controller and estimator parameters
should be chosen according to the initial estimates of (0) 0.055 Me ,
B(0) 0.225 (0) 0.125 Asc , 1(0) 0.03 Acog , 3 (0) 0.03 Acog and 0
d (0) 0 . Simulate the ARC control law with
with the continuous plant (H1) for the following sets of actual values for the linear motor:
Case 1: 1 30 0.025, 0.1, 0.1, 0.01, 0.05, 1 M BA A A d e sc cog cog
Case 2: 1 30 0.085, 0.35, 0.15, 0.05, 0.05, 1 M BA A A d e sc cog cog
Case 3: round 10 sin(20 )
1 3 0.025, 0.1, 0.1, 0.01, 0.05, ( ) 1 ( 1) t t M B A A A dt e sc cog cog
Case 4: round 10 sin(20 )
1 3 0.085, 0.35, 0.15, 0.05, 0.05, ( ) 1 ( 1) t t M B A A A dt e sc cog
The total simulation time is 4 seconds. Obtain the following time plots:
(ix) A plot showing the reference command input c u , the reference output my , and the actual
output y .
(x) A plot showing the output tracking error m eyy .
(xi) A plot showing the control input u.
(xii) A plot showing the parameter estimates and their actual values.
To receive full credit, you need to provide the details of all the controller gains used in the
simulation and how they are chosen as well.
Please attach your simulation program so that they can be run to check the correctness of
your simulation results as well.
PROBLEM #6 (100 points)
Consider the same linear motor system as in Problem 1.
K. Synthesize an integrated direct/indirect adaptive robust controller (DIARC) that achieves a
guaranteed transient and steady-state tracking performance in general, and asymptotic output
tracking (i.e., () () () y m e t yt y t converges to zero asymptotically) for constant external
disturbances of 0 dt d t () . To receive full credit, you need to provide the detailed designs and
proof as well.
L. Let the reference output be the output of a reference model given by
in which the reference command input c u is a square wave type reference command with a half
period of 0.6 sec representing a back-forth movement of travel distance of 0.2m. Assuming a
sampling rate of 2kHz and using the Euler’s approximation algorithm, discretize the continuous
adaptive control law in part A. The initial values for the controller and estimator parameters
should be chosen according to the initial estimates of (0) 0.055 Me ,
B(0) 0.225 ,
(0) 0.125 Asc , 1 (0) 0.03 Acog , 3 (0) 0.03 Acog and 0
d (0) 0 . Simulate the ARC control law with
with the continuous plant (H1) for the following sets of actual values for the linear motor:
Case 1: 1 30 0.025, 0.1, 0.1, 0.01, 0.05, 1 M BA A A d e sc cog cog
Case 2: 1 30 0.085, 0.35, 0.15, 0.05, 0.05, 1 M BA A A d e sc cog cog
Case 3: round 10 sin(20 )
1 3 0.025, 0.1, 0.1, 0.01, 0.05, ( ) 1 ( 1) t t M B A A A dt e sc cog cog
Case 4: round 10 sin(20 )
1 3 0.085, 0.35, 0.15, 0.05, 0.05, ( ) 1 ( 1) t t M B A A A dt e sc cog
The total simulation time is 4 seconds. Obtain the following time plots:
(xiii) A plot showing the reference command input c u , the reference output my , and the actual
output y .
(xiv) A plot showing the output tracking error m eyy .
(xv) A plot showing the control input u.
(xvi) A plot showing the parameter estimates and their actual values.
To receive full credit, you need to provide the details of all the controller gains used in the
simulation and how they are chosen as well.
Please attach your simulation program so that they can be run to check the correctness of
your simulation results as well.
Note: When RLSE is used to estimate the physical parameter vector as in IARC or DIARC designs,
in continuous time domain, the resulting parameter estimation algorithm is of the following form:
(S4)
As mentioned in Remark 2 on page 26 of the course notes on parameter estimation, the above
adaptation rate updating law may be sensitive to the discretization effect due to the quadratic term
of involved, especially when simple discretization method such as Euler is used. So in practice
we will obtain ? using discretized version of the following equivalent differential equation of (S4):
(S4):
Specifically, when Euler discretization method is used, the discretized version of (S5) in
implementation becomes
(S6)
where kt kT is the k-th sampling instance and T is the sampling period. Using the matrix
inversion lemma with 2
(S7)
Note that this way of calculating the adaptation rate matrix 1 ( ) ktused in continuous time-domain
algorithm (S4) is equivalent to the discrete parameter estimation algorithm based on the sampled
values at each sampling time as follows. At each sampling time kt kT , the linear regression model
of T
f ef f u d in continuous time domain leads to the following linear regression model in
discrete-time domain when 0 f d :
() ()Tf k ef k ut t(S8)
Thus, the RLS parameter estimation algorithm in discrete-time domain based on this discrete-time
domain model would beis the equivalent forgetting factor in discrete-time domain. Comparing (S9)
to (S7) with 2 1 for LS estimation, it is easy to see that
1 1 () () Pt t T k k (S10)
which is what we would expect when we discretize the continuous parameter adaptation law using Euler method at the sampling instances.

因为专业，所以值得信赖。如有需要，请加QQ：99515681 或邮箱：99515681@qq.com

微信：codehelp

标签：Control,plot,SET,reference,0.05,Mechatronic,cog,time,output
来源： https://www.cnblogs.com/mkka/p/11202951.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。