QTcpSever & QTcpSocket

2019-05-11 15:46:12 阅读：432 来源： 互联网

标签：SLOT disconnect socket SIGNAL QTcpSever QTcpSocket handle

一、tcp客户端

建立套接字socket

连接信号与槽函数

disconnect(socket,SIGNAL(readyRead()),this,SLOT(readMessage()));
disconnect(this,SIGNAL(alreadyRead()),this,SLOT(returnMessage()));
disconnect(socket,SIGNAL(connected()),this,SLOT(isConnect()));
disconnect(socket,SIGNAL(disconnected()),this,SLOT(isDisconnect()));
disconnect(socket,SIGNAL(error(QAbstractSocket::SocketError)),this,SLOT(isError(QAbstractSocket::SocketError)));

connect(socket,SIGNAL(readyRead()),this,SLOT(readMessage()));
connect(this,SIGNAL(alreadyRead()),this,SLOT(returnMessage()));
connect(socket,SIGNAL(connected()),this,SLOT(isConnect()));
connect(socket,SIGNAL(disconnected()),this,SLOT(isDisconnect()));
connect(socket,SIGNAL(error(QAbstractSocket::SocketError)),this,SLOT(isError(QAbstractSocket::SocketError)));

然后

socket->connectToHost（）；

设置要连接的ip和port

新的连接来之时；先掉用incomingConnection(qintptr handle)处理，之后再调用newConnect()

incomingConnection用于获取handle,获取socket的id

服务端

tcpSever->listen(QHostAddress::Any,1414)

监听

1 void TcpSever::incomingConnection(qintptr handle)

2 {

3 socket->setSocketDescriptor(handle);

4 }

[virtual protected] void QTcpServer::incomingConnection(qintptr socketDescriptor)

This virtual function is called by QTcpServer when a new connection is available. The socketDescriptor argument is the native socket descriptor for the accepted connection.

The base implementation creates a QTcpSocket, sets the socket descriptor and then stores the QTcpSocket in an internal list of pending connections. Finally newConnection() is emitted.

Reimplement this function to alter the server's behavior when a connection is available.

If this server is using QNetworkProxy then the socketDescriptor may not be usable with native socket functions, and should only be used with QTcpSocket::setSocketDescriptor().

Note: If another socket is created in the reimplementation of this method, it needs to be added to the Pending Connections mechanism by calling addPendingConnection().

Note: If you want to handle an incoming connection as a new QTcpSocket object in another thread you have to pass the socketDescriptor to the other thread and create the QTcpSocket object there and use its setSocketDescriptor() method.

标签：SLOT,disconnect,socket,SIGNAL,QTcpSever,QTcpSocket,handle
来源： https://www.cnblogs.com/xiaowulang/p/10848830.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。

ICode9

QTcpSever & QTcpSocket