标签：BCM F55 Tech2 Corvette tech2win 2005 C6
We have discussed how to remove F55 Magnetic Ride from Corvette C5 2005 with GM Tech 2 scanner before. Today comes the instruction on the 2006-2012 Corvette C6.
You can use either gm tech2 clone or VXDIAG VCX NANO GM. vcx nano is the better deal, since it is a MDI clone and will work with both tech2win and GDS2 required on the newer cars.
Turning off F55 is a snap with tech2win. And will be the same on either hand held tech II running tech2win software itself, or VCX Nano which will be running tech2win on a laptop instead.
Note, for C6 years 2006 to 2012, use the 2013 year in Tech2win with the nano and tech2win on the laptop.
Go to Body with nano connected to the car and tech2win, then select BCM
set up to get into the BCM set up process as shown below. If you have a
2005 C6 with Nano, just use 2005 year.
Here is an example on Corvette C6 2005.
F55 mag ride delete (rear time dampering from BCM set up) on Corvette C6 2005:
I replaced my f55 mag ride shocks with z06 shocks and removed the F55 signals coming from the BCM with a Tech 2. Some people say you can do this without the Tech 2 and use a resistor. As far as I can tell the BCM is looking for a fluctuating signal back showing a good shock. If it sees a static signal, there’s something wrong with the shock and it’ll throw a “service handling system” warning on the DIC.
1. Hook up Tech 2, turn the car ON, make sure module in the rear is PLUGGED IN. Do Not unplug the rear module.
2. Go to Diagnostics- 2005- Passenger car- Chevrolet- Y-Vehicle Control System- Computer/Integrated System -Manual
– Module setup- Body Control Module – BCM Setup
Press Yes if tech2 asks to setup a new BCM
Press Yes to config options only
Select Region USA and module Memory Recall
New BCM setup is complete.
F55 magnetic ride removal is done.
标签：BCM,F55,Tech2,Corvette,tech2win,2005,C6 来源： https://www.cnblogs.com/paulakeener/p/16528319.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。