标签：entry Entry MySQL duplicate Duplicate error TABLE ALTER
A few weeks ago and in MySQL 5.7, I had an ALTER TABLE that failed with a duplicate entry error. This is old news as it is happening since MySQL 5.6, but I only saw this recently because I am normally using online schema change from the Percona Toolkit (pt-osc) or GitHub's online schema migration (gh-ost). I do not like that and I am disappointed this has not been improved, so this post is partially a rant, but not only, because I explain why ALTER TABLE is failing and I give solutions to avoid the failure.
So ALTER TABLE can fail with a duplicate entry error, let's see this:
mysql [localhost:8027] {msandbox} (test_jfg) > ALTER TABLE t DROP COLUMN v2;
ERROR 1062 (23000): Duplicate entry '1' for key 't.v'
As you can see, this is not a complicated ALTER. Above is failing for MySQL 8.0.27, and I am also able to reproduce with 5.7.36 and 5.6.51, but not with 5.5.62. The full reproduction test case is at the end of this post.
I am not the first one seeing this. When googling "MySQL ALTER TABLE Duplicate entry", I got these results (and yes, OPTIMIZE TABLE has a similar problem):
- MySQL - Duplicate entry error when trying to add new column (on Stack Overflow)
- MySQL Bugs: #76895: Adding new column OR Drop column causes duplicate PK error
- MySQL Bugs: #98600: Optimize table fails with duplicate entry on UNIQUE KEY
In the links above, we can get reference to the Online DDL Limitations section of the MySQL Documentation:
When running an in-place online DDL operation, the thread that runs the ALTER TABLE statement applies an online log of DML operations that were run concurrently on the same table from other connection threads. When the DML operations are applied, it is possible to encounter a duplicate key entry error (ERROR 1062 (23000): Duplicate entry), even if the duplicate entry is only temporary and would be reverted by a later entry in the online log. This is similar to the idea of a foreign key constraint check in InnoDB in which constraints must hold during a transaction.
It looks like the online DDL improvements of MySQL 5.6 introduced this behavior. In my humble opinion, this is a regression: a perfectly working ALTER in 5.5 is now throwing an error in 5.6, 5.7 and 8.0. From my understanding, the error condition is the following
While the ALTER is running,
anything causing a duplicate entry, even a "silent" one,
makes the ALTER fails in the "log apply" phase.
An example of a "silent" duplicate entry is the one "hidden" by INSERT ... ON DUPLICATE KEY UPDATE (IODKU). Yes, the ALTER fails with a duplicate entry error if an IODKU ends-up doing an UPDATE while the table is altered (what the documentation calls a temporary duplicate entry) ! And the ALTER is not failing at the moment of the succeeding IODKU (or at the moment of the failing INSERT), it will fail much later - maybe hours later - at log apply phase. This is a terrible default behavior that is very annoying !
Before ranting even more, let me tell you how to avoid this error. The first solution is to use a blocking DDL by adding LOCK=EXCLUSIVE to the ALTER. A non-blocking solution, which is also friendlier to replication (an online ALTER might be partially non-blocking on the primary, but it will block the SQL thread on replicas which might cause lag) is to use pt-osc or gh-ost. Finally, another solution is to configure MySQL not to use DDLs by setting the variable old_alter_table to ON, which can be set at the session or at the global level (this is the only solution I found for OPTIMIZE TABLE).
If you are not interested in the rant, you should stop reading now.
The first annoyance about ALTER failing with a duplicate entry error is the misleading error message. The first time I saw this, I asked myself "How can this be ?", "Did I do something wrong ?" "Is my data corrupted ?" and I was worried. For being more exact and less worrying, the error message should be something like "Online ALTER failed during the log apply phase because of a concurrent duplicate entry (or INSERT ... ON DUPLICATE KEY UPDATE)", and ideally, it should give a solution to this problem (add LOCK=EXCLUSIVE to the ALTER, or use SET old_alter_table = ON). And for this, I opened Bug#104608 - Improve error message for ATLER failing because concurrent Duplicate entry.
The second annoyance is the unfriendly behavior. For me, this failure mode should not be the default behavior. I like that MySQL is implementing online DDL, but online DDL that could fail should not be the default behavior. I would prefer, when introducing an improvement that could fail, that benefiting from the improvement is an option (in this case, it would be LOCK=NONE) with the previous behavior staying the default. I understand that is is now a little late to go back to the MySQL 5.5 behavior because it has become expected that some DDL are online, but I wish we would not be where we are today on this. This is now part of the Dark Side of MySQL until this is fixed (and this is why I am calling this situation the ONLINE DDL purgatory in the next bug report).
A third annoyance about this behavior is that this was not improved for 8 years (MySQL 5.6 was GA in February of 2013) ! Improving the error message as I suggested above is one thing, removing this failure condition is another. I realize this might be complicated, but let's start with the error message. Once the message is better, I do not think it is unrealistic to hope for something better. And for this, I opened Bug#104626 - Remove failure of Online ALTER because concurrent Duplicate entry.
That is all I have for today, if you have historical context that might change my mind about this behavior being unfriendly, or if you have other thoughts on the subject, feel free to leave a comment below.
Reproducing the Duplicate Entry Error During ALTER TABLE with dbdeployer
# Create a sandbox:
dbdeployer deploy single mysql_8.0.27
# Initialize the test environment:
./use <<< "
CREATE DATABASE test_jfg;
CREATE TABLE test_jfg.t(
id INT NOT NULL AUTO_INCREMENT PRIMARY KEY,
v INT, v2 INT, UNIQUE KEY(v))"
# Make rows big to be able to quickly generate a big table (each row is close to 8 KB):
seq -f "ALTER TABLE t add column c%02.0f CHAR(255) DEFAULT '';" 1 30 | ./use test_jfg
# Make commit fast so loading is not too long:
./use <<< "set global sync_binlog = 0, global innodb_flush_log_at_trx_commit = 0"
# Fill the table with about 1 GB of data:
seq -f "INSERT INTO t (v) VALUES (%0.0f);" 1 $((1024*1024/8)) | ./use test_jfg
# Generate the error with a failing INSERT:
./use -N <<< "SELECT VERSION()" &&
( sleep 1; ./use test_jfg <<< "INSERT INTO t (v) VALUES (1)" || echo "INSERT KO $(date)"; ) & \
./use test_jfg <<< "ALTER TABLE t DROP COLUMN c01" && echo "ALTER OK $(date)" || echo "ALTER KO $(date)"
[1] 23767
8.0.27
ERROR 1062 (23000) at line 1: Duplicate entry '1' for key 't.v'
INSERT KO Mon Nov 8 21:56:29 UTC 2021
ERROR 1062 (23000) at line 1: Duplicate entry '1' for key 't.v'
[1]+ Done ./use -N <<< "SELECT VERSION()" && ( sleep 1; ./use test_jfg <<< "INSERT INTO t (v) VALUES (1)" || echo "INSERT KO $(date)" )
ALTER KO Mon Nov 8 21:57:23 UTC 2021
# In above, the first duplicate entry is from the INSERT and the 2nd is from the ALTER.
# We can see that the INSERT completes before the ALTER (because of the online DDL),
# which is not the case with 5.5.62 below (INSERT blocked and ALTER succeeding).
./use -N <<< "SELECT VERSION()" &&
( sleep 1; date; ./use test_jfg <<< "INSERT INTO t (v) VALUES (1)" || echo "INSERT KO $(date)"; ) & \
./use test_jfg <<< "ALTER TABLE t DROP COLUMN c01" && echo "ALTER OK $(date)" || echo "ALTER KO $(date)"
[1] 10052
5.5.62
Mon Nov 8 23:31:45 UTC 2021
ERROR 1062 (23000) at line 1: Duplicate entry '1' for key 'v'
ALTER OK Mon Nov 8 23:32:07 UTC 2021
INSERT KO Mon Nov 8 23:32:07 UTC 2021
[1]+ Done ./use -N <<< "SELECT VERSION()" && ( sleep 1; date; ./use test_jfg <<< "INSERT INTO t (v) VALUES (1)" || echo "INSERT KO $(date)" )
# And we have a similar error with OPTIMIZE TABLE:
./use -N <<< "SELECT VERSION()" &&
( sleep 1; ./use test_jfg <<< "INSERT INTO t (v) VALUES (1)" || echo "INSERT KO $(date)"; ) & \
./use test_jfg <<< "OPTIMIZE TABLE t"; echo "OPTIMIZE $(date)"
[1] 31753
8.0.27
ERROR 1062 (23000) at line 1: Duplicate entry '1' for key 't.v'
INSERT KO Mon Nov 8 22:05:48 UTC 2021
Table Op Msg_type Msg_text
test_jfg.t optimize note Table does not support optimize, doing recreate + analyze instead
test_jfg.t optimize error Duplicate entry '1' for key 't.v'
test_jfg.t optimize status Operation failed
[1]+ Done ./use -N <<< "SELECT VERSION()" && ( sleep 1; ./use test_jfg <<< "INSERT INTO t (v) VALUES (1)" || echo "INSERT KO $(date)" )
OPTIMIZE Mon Nov 8 22:06:53 UTC 2021
# For completeness, generate the error with an INSERT ON DUPLICATE KEY UPDATE:
./use -N <<< "SELECT VERSION()" &&
( sleep 1; ./use test_jfg <<< "INSERT INTO t (v) VALUES (1) ON DUPLICATE KEY UPDATE v2=0" && echo "IODKU OK $(date)"; ) & \
./use test_jfg <<< "ALTER TABLE t DROP COLUMN c02" && echo "ALTER OK $(date)" || echo "ALTER KO $(date)"
[1] 2356
8.0.27
IODKU OK Mon Nov 8 22:08:58 UTC 2021
ERROR 1062 (23000) at line 1: Duplicate entry '1' for key 't.v'
[1]+ Done ./use -N <<< "SELECT VERSION()" && ( sleep 1; ./use test_jfg <<< "INSERT INTO t (v) VALUES (1) ON DUPLICATE KEY UPDATE v2=0" && echo "IODKU OK $(date)" )
ALTER KO Mon Nov 8 22:10:06 UTC 2021
Reference:
https://jfg-mysql.blogspot.com/2021/11/duplicate-entry-in-alter-table-and-in-optimize-table.html
标签：entry,Entry,MySQL,duplicate,Duplicate,error,TABLE,ALTER 来源： https://www.cnblogs.com/piperck/p/16493652.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。