标签：双工 int GigabitEthernet0 isolate 端口 交换机 Error lvhanghmm port
配置交换机端口隔离、速率、双工等
...
The device is running!
############################################
<lvhanghmm>sys
Enter system view, return user view with Ctrl+Z.
[lvhanghmm]port-iso
[lvhanghmm]port-isolate mode 12
^
Error: Unrecognized command found at '^' position.
[lvhanghmm]port-isolate mode l2
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]int giga
[lvhanghmm]int GigabitEthernet 1/0/1
^
Error: Wrong parameter found at '^' position.
[lvhanghmm]int GigabitEthernet l/0/1
^
Error: Wrong parameter found at '^' position.
[lvhanghmm]int GigabitEthernet 1/0/1
^
Error: Wrong parameter found at '^' position.
[lvhanghmm]int GigabitEthernet1/0/1
^
Error: Wrong parameter found at '^' position.
[lvhanghmm]int GigabitEthernet0/0/1
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]port
[lvhanghmm-GigabitEthernet0/0/1]port-iso
[lvhanghmm-GigabitEthernet0/0/1]port-isolate en
[lvhanghmm-GigabitEthernet0/0/1]port-isolate enable grouop
[lvhanghmm-GigabitEthernet0/0/1]port-isolate enable grou
[lvhanghmm-GigabitEthernet0/0/1]port-isolate enable group l
^
Error: Wrong parameter found at '^' position.
[lvhanghmm-GigabitEthernet0/0/1]port-isolate enable group 1
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]quit
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]int giga
[lvhanghmm]int GigabitEthernet 0/0/2
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]port
[lvhanghmm-GigabitEthernet0/0/2]port-iso
[lvhanghmm-GigabitEthernet0/0/2]port-isolate en
[lvhanghmm-GigabitEthernet0/0/2]port-isolate enable gro
[lvhanghmm-GigabitEthernet0/0/2]port-isolate enable group 1
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]quit
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]
配置以太网接口GE0/0/1在自协商模式下协商速率为100Mb/s
[lvhanghmm]int giga
[lvhanghmm]int GigabitEthernet 0/0/1
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]negotiation auto
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]aut
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]auto s
[lvhanghmm-GigabitEthernet0/0/1]auto speed 100
Error: Configuration fails.
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
#配置以太网电接口GE0/0/1在自协商模式下双工模式为全双工模式
[lvhanghmm]int giga
[lvhanghmm]int GigabitEthernet 0/0/1
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]negotiation auto
请忽略以下的内容
开机就开机呀！怎么还有所谓的登陆与离开呀？不是开机就能够用计算机了吗？ 开什么玩笑，在Linux系统中由于是多用户多任务的环境，所以系统随时都有很多不同 的用户所下达的任务在进行， 因此正确的开关机可是很重要的！不正常的关机可能会 导致文件系统错乱，造成数据的毁损呢！这也是为什么通常我们的Linux主机都会加挂 一个不断电系统啰！
如果在第三章一切都顺利的将CentOS 7.x完成安装并且重新开机后， 应该就会出 现如下的等待登陆的图形画面才对。画面中1号箭头显示目前的日期与时间，2号箭头则 是辅助功能、语系、音量与关机钮， 3号箭头就是我们可以使用帐号登陆的输入框框， 至于4号箭头则是在使用特别的帐号登陆时才会用到的按钮。
标签：双工,int,GigabitEthernet0,isolate,端口,交换机,Error,lvhanghmm,port 来源： https://www.cnblogs.com/lvhanghmm/p/16394433.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。