标签：led struct dev 原子 实验 gpio include gpioled

1.驱动代码

#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/ide.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/errno.h> 
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/cdev.h>
#include <linux/device.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/mach/map.h>

#define GPIOLED_CNT     1
#define GPIOLED_NAME    "gpioled"
#define LEDOFF          0            /* 关灯 */
#define LEDON           1            /* 开灯 */

/* gpioled设备结构体 */
struct gpioled_dev{
    dev_t           devid;          /* 设备号 */
    struct cdev     cdev;           /* 字符设备 */
    struct class    *class;         /* 类 */
    struct device   *device;        /* 设备 */
    int             major;          /* 注设备号 */
    int             minor;          /* 次设备号 */
    struct device_node *nd;         /* 设备节点 */
    int             led_gpio;       /* 设备树里面的编号 */
    atomic_t        lock;           /* 原子变量的锁 */ /* 加载驱动的时候初始化 */
};

struct gpioled_dev gpioled; /* 定义LED结构体 */

void led_switch(struct gpioled_dev *dev, u8 sta)
{
    if(sta == LEDON) {
        gpio_set_value(dev->led_gpio, 0);
    }else if(sta == LEDOFF) {
        gpio_set_value(dev->led_gpio, 1);
    } else {
        printk("Error Number! \r\n");
    }
}

static int gpioled_open(struct inode *inode, struct file *filp)
{
    /* 判断这个led驱动有没有被其他应用使用 */
    /* 该函数是先将锁减1,如果为0返回真，锁的初始化是1,如果被用了就是0,再减去1就是-1 */
    if (!atomic_dec_and_test(&gpioled.lock))
    {
        /* 锁用了 */
        /* 在if里面已经减1了，所以要加回来 */
        atomic_inc(&gpioled.lock);
        return -EBUSY; /* 返回忙 */
    }

    /* 如果锁没人用，就直接运行到下面 */
    /* 注意此时再if里面已经减1了，再release函数里面必须加回来 */
    filp->private_data = &gpioled;

    return 0;
}

static int gpioled_release(struct inode *inode, struct file *filp)
{
    //struct gpioled_dev *dev = (struct gpioled_dev *)filp->private_data;
    /* 锁加回来 */
    atomic_inc(&gpioled.lock);
    
    return 0;
}

static ssize_t gpioled_write(struct file *filp, const char __user *buf, size_t count, loff_t *ppos)
{
    int retvalue;
    unsigned char databuf[1];
    // unsigned char ledstat; 
    struct gpioled_dev *dev = (struct gpioled_dev *)filp->private_data;

    retvalue = copy_from_user(databuf, buf, count);
    if(retvalue < 0) {
        printk("kernel write failed!\r\n");
        return -EFAULT;
    }
    led_switch(dev, databuf[0]);   
    
    return 0;
}

static ssize_t gpioled_read(struct file *filp, char __user *buf,
size_t cnt, loff_t *offt)
{
    return 0;
}

/* 字符设备操作集 */
static const struct file_operations gpioled_fops = {
    .owner = THIS_MODULE,
    .write = gpioled_write,
    .open = gpioled_open,
    .read = gpioled_read,
    .release = gpioled_release,
};

/* 模块入口函数 */
static int __init gpioled_init(void)
{
    /* 定义一些所需变量 */
    int ret = 0;

    /* 初始化锁 */
    atomic_set(&gpioled.lock, 1);

    /* 1. 注册字符设备驱动 */
    gpioled.major = 0;
    if(gpioled.major) {
        gpioled.devid = MKDEV(gpioled.major, 0);
        ret = register_chrdev_region(gpioled.devid, GPIOLED_CNT, GPIOLED_NAME);  
    } else {
        alloc_chrdev_region(&gpioled.devid, 0, GPIOLED_CNT, GPIOLED_NAME);
        gpioled.major = MAJOR(gpioled.devid);
        gpioled.minor = MINOR(gpioled.devid);
    }
    if(ret < 0){
        goto fail_devid;
    }
    printk("Make devid success! \r\n");
    printk("major = %d, minor = %d \r\n", gpioled.major, gpioled.minor);

    /* 2. 初始化cdev */
    gpioled.cdev.owner = THIS_MODULE;
    cdev_init(&gpioled.cdev, &gpioled_fops);
    ret = cdev_add(&gpioled.cdev, gpioled.devid, GPIOLED_CNT);
    if (ret < 0){
        goto fail_cdev;
    } else {
        printk("Cdev add sucess! \r\n");
    }

    /* 3. 自动创建设备节点 */
    gpioled.class = class_create(THIS_MODULE, GPIOLED_NAME);
    if(IS_ERR(gpioled.class)) {
        ret = PTR_ERR(gpioled.class);
        goto fail_class;
    } else {
        printk("Class create sucess! \r\n");
    }

    gpioled.device = device_create(gpioled.class, NULL, gpioled.devid, NULL, GPIOLED_NAME);
    if(IS_ERR(gpioled.device)) {
        ret = PTR_ERR(gpioled.device);
        goto fail_device;
    } else {
        printk("Device create sucess! \r\n");
    }

    /* 1. 获取设备节点 */
    gpioled.nd = of_find_node_by_path("/gpioled");
    if( gpioled.nd == NULL){
        ret = -EINVAL;
        printk("gpioled node can not found!\r\n");
        goto fail_findnd;
    }

    /* 2. 获取设备所对应的gpio */
    /* 注意第三个参数，因为只有一个索引，所以是0 */
    gpioled.led_gpio = of_get_named_gpio(gpioled.nd, "led-gpios", 0);
    if( gpioled.led_gpio < 0) {
        printk("Can't find led gpio \r\n");
        ret = -EINVAL;
        goto fail_findnd;
    }
    printk("Led gpio num = %d. \r\n", gpioled.led_gpio);
    
    /* 3. 获取到IO之后，申请IO */
    /* 作用是申请之后，就能知道该IO是否被其他函数占用 */
    /* 如果申请失败，说明被战用啦 */
    /* 解决方法：1.搜索所需管脚 2.在搜索复用管脚，例如 &gpio1 3 */
    ret = gpio_request(gpioled.led_gpio, "led-gpio");
    if(ret) {
        printk("Failed to request the led gpio! \r\n");
        ret = -EINVAL;
        goto fail_findnd;
    }

    /* 4. 使用IO */
    ret = gpio_direction_output(gpioled.led_gpio, 1); /* 设置输出，默认高电平不点亮 */
    if(ret < 0){
        printk("Failed to set input or output! \r\n");
        goto fail_set_output;
    }

    /* 5. 输出低电平，点亮LED */
    gpio_set_value(gpioled.led_gpio, 0);

    printk("gpioled init! \r\n");
    return 0;

/* 错误处理 */
fail_set_output:
    gpio_free(gpioled.led_gpio);
fail_findnd:
    device_destroy(gpioled.class, gpioled.devid);
fail_device:
    class_destroy(gpioled.class);
fail_class:
    cdev_del(&gpioled.cdev);
fail_cdev:
    unregister_chrdev_region(gpioled.devid, GPIOLED_CNT);
fail_devid:
    return ret;
}

/* 模块出口函数 */
static void __exit gpioled_exit(void)
{
    /* 关灯 */
    gpio_set_value(gpioled.led_gpio, 1);

    /* 1. 释放设备号 */
    cdev_del(&gpioled.cdev);
    /* 2. 注销设备号 */
    unregister_chrdev_region(gpioled.devid, GPIOLED_CNT);
    /* 3. 摧毁设备 */
    device_destroy(gpioled.class, gpioled.devid);
    /* 4.摧毁类 */
    class_destroy(gpioled.class);

    /* 释放IO， 和上面的申请IO对应 */
    gpio_free(gpioled.led_gpio);

    printk("gpioled exit! \r\n");
}

/* 模块入口和出口注册 */
module_init(gpioled_init);
module_exit(gpioled_exit);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Shao Zheming");

2.应用代码

#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <string.h>

/* 
 * argc: 应用程序参数个数
 * argv[]: 参数是什么，具体的参数，说明参数是字符串的形式
 * .chrdevbaseApp <filename> <0:1> 0表示关灯，1表示开灯
 * .chrdevbaseApp /dev/led 0 关灯
 * .chrdevbaseApp /dev/led 1 开灯
 * */

#define LEDOFF      0   /* 关灯 */
#define LEDON       1   /* 开灯 */

int main(int argc, char *argv[])
{
    if(argc != 3)
    {
        printf("Error Usage!\r\n");
        return -1;
    }
    
    char *filename;
    int fd, retValue;
    unsigned char dataBuf[1];
    unsigned char cnt = 0;          /* 计数 */

    filename = argv[1];
    fd = open(filename, O_RDWR);
    if(fd < 0)
    {
        printf("file %s open failed! \r\n", filename);
        return -1;
    }

    dataBuf[0] = atoi(argv[2]);
    retValue = write(fd, dataBuf, sizeof(dataBuf));
    if(retValue < 0){
        printf("Led Control Failed \r\n");
        close(fd);
        return -1;
    }

    /* 模拟占用25sLED */
    while(1){
        sleep(5);
        ++cnt;
        printf("App running times: %d \r\n", cnt);
        if(cnt > 4){
            break;
        }
    }

    printf("App running finished! \r\n");

    /* 关闭应用 */
    retValue = close(fd);
    if(retValue < 0) {
        printf("File close failed! \r\n");
        return -1;
    }
    
    return 0;
}

3.效果

标签：led,struct,dev,原子,实验,gpio,include,gpioled
来源： https://www.cnblogs.com/yoshinb/p/15769801.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。