标签:练习 R1 R2 R3 GigabitEthernet0 配置 RIP rip 192.168
要求分析:
1.R3自带环路,R1和R2需要配置两个环路,骨干链路自己设计 ,区域为192.168.1.0/24
2.使用RIPv2,且不能直接宣告R3环路
3.全网可达,数据安全(设置密文),汇总路由
解:
首先是网络地址的分析,需要2+1个网段2^n-2>3 --- n为3,借三位
192.168.1.0/24+3
192.168.1.0/27 ---骨干链路
192.168.1.0/30 --- R1和R2之间的地址段
192.168.1.4/30 ---R2和R3之间的地址段
192.168.1.32/27 ---R1环回
192.168.1.33/28 ---R1的环回1
192.168.1.49/28 ---R1的环回2
192.168.1.64/27 ---R2环回
192.168.1.65/28 ---R2的环回1
192.168.1.81/28 ---R2的环回2
此时地址已经分配完毕。
然后开始设置汇总:
R1 的汇总可以设置为192.168.1.32/27
R2 的汇总可以设置为192.168.1.64/27
这个时候不要忘记设置空接口,防止黑洞
然后就密文设置,我在R1和R2之间设置一个123456,R2和R3之间设置654321。
解题:
基础配置
//R1
<Huawei>SYS
Enter system view, return user view with Ctrl+Z.
[Huawei]SYS R1
[R1]inte
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]ip a
[R1-GigabitEthernet0/0/0]ip accounting
[R1-GigabitEthernet0/0/0]ip address 192.168.1.1 30
Nov 16 2021 23:04:59-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R1-GigabitEthernet0/0/0]int l0
[R1-LoopBack0]ip a
[R1-LoopBack0]ip address 192.168.1.33 28
[R1-LoopBack0]int l1
[R1-LoopBack1]ip ad
[R1-LoopBack1]ip address 192.168.1.49 28
//配置null0空接口,防汇总环路
[R1]ip route-static 192.168.1.32 27 null 0
//R2
[R2]int
[R2]interface g0/0/0
[R2-GigabitEthernet0/0/0]ip ad
[R2-GigabitEthernet0/0/0]ip address 192.168.1.2 30
Nov 16 2021 23:05:52-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R2-GigabitEthernet0/0/0]interface g0/0/1
[R2-GigabitEthernet0/0/1]ip address 192.168.1.5 30
Nov 16 2021 23:06:06-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R2-GigabitEthernet0/0/1]int l0
[R2-LoopBack0]ip ad
[R2-LoopBack0]ip address 192.168.1.65 28
[R2-LoopBack0]int l1
[R2-LoopBack1]ip address 192.168.1.81 28
[R2-LoopBack1]q
//R2的空接口配置
[R2]ip route-static 192.168.1.64 27 null0
//R3
[R3]int
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]ip ad
[R3-GigabitEthernet0/0/0]ip address 192.168.1.6 30
Nov 16 2021 23:06:57-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R3-GigabitEthernet0/0/0]int l0
[R3-LoopBack0]ip ad
[R3-LoopBack0]ip address 3.3.3.0 24
Error: The specified IP address is invalid.
[R3-LoopBack0]ip address 3.3.3.1 24
[R3-LoopBack0]q
//R3自带环回接口,所以不配置null0
配置RIP
//R1
[R1]rip
[R1-rip-1]ver
[R1-rip-1]verify-source
[R1-rip-1]version 2
[R1-rip-1]net
[R1-rip-1]network 192.168.1.0
//R2
[R2]rip
[R2-rip-1]ver
[R2-rip-1]verify-source
[R2-rip-1]version 2
[R2-rip-1]network 192.168.1.0
//R3
[R3]rip
[R3-rip-1]ver
[R3-rip-1]verify-source
[R3-rip-1]version 2
[R3-rip-1]net
[R3-rip-1]network 192.168.1.0
RIP汇总
//R1汇总
[R1]int
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]rip s
[R1-GigabitEthernet0/0/0]rip split-horizon
[R1-GigabitEthernet0/0/0]rip summary-address 192.168.1.32 255.255.255.224
//R2汇总
[R2]interface g0/0/0
[R2-GigabitEthernet0/0/0]rip summary-address 192.168.1.64 255.255.255.224
[R2-GigabitEthernet0/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]rip summary-address 192.168.1.64 255.255.255.224
//R3只有一个环回不需要汇总,此时分别查看R1,R2,R3的RIP条目
//R1
<R1>display rip 1 route
Route Flags : R - RIP
A - Aging, G - Garbage-collect
----------------------------------------------------------------------------
Peer 192.168.1.2 on GigabitEthernet0/0/0
Destination/Mask Nexthop Cost Tag Flags Sec
192.168.1.4/30 192.168.1.2 1 0 RA 22
192.168.1.64/27 192.168.1.2 1 0 RA 22
//R2
[R2]display rip 1 route
Route Flags : R - RIP
A - Aging, G - Garbage-collect
----------------------------------------------------------------------------
Peer 192.168.1.1 on GigabitEthernet0/0/0
Destination/Mask Nexthop Cost Tag Flags Sec
192.168.1.32/27 192.168.1.1 1 0 RA 25
//R3
<R3>display rip 1 route
Route Flags : R - RIP
A - Aging, G - Garbage-collect
----------------------------------------------------------------------------
Peer 192.168.1.5 on GigabitEthernet0/0/0
Destination/Mask Nexthop Cost Tag Flags Sec
192.168.1.5/30 192.168.1.5 1 0 RA 13
192.168.1.32/27 192.168.1.5 2 0 RA 13
192.168.1.64/27 192.168.1.5 1 0 RA 13
!!!为了安全起见,我在R1和R2之间设置密文登录,密文为123456
而R2和R3之间设置密文的密码为654321
//R1
[R1]rip
[R1-rip-1]ver
[R1-rip-1]verify-source
[R1-rip-1]version 2
[R1-rip-1]int
[R1-rip-1]int g0/0/0
[R1-GigabitEthernet0/0/0]rip au
[R1-GigabitEthernet0/0/0]rip authentication-mode ?
hmac-sha256
md5 MD5 authentication
simple Simple authentication
[R1-GigabitEthernet0/0/0]rip authentication-mode md5 ?
nonstandard Nonstandard MD5 authentication packet format (IETF)
usual Huawei MD5 authentication packet format
[R1-GigabitEthernet0/0/0]rip authentication-mode md5 u
[R1-GigabitEthernet0/0/0]rip authentication-mode md5 usual c
[R1-GigabitEthernet0/0/0]rip authentication-mode md5 usual cipher 123456
[R1-GigabitEthernet0/0/0]q
//R2
[R2]rip
[R2-rip-1] ver
[R2-rip-1]version 2
[R2-rip-1]int
[R2-rip-1]int
[R2-rip-1]int g0/0/1
[R2-GigabitEthernet0/0/1]rip a
[R2-GigabitEthernet0/0/1]rip authentication-mode md5 us
[R2-GigabitEthernet0/0/1]rip authentication-mode md5 usual c
[R2-GigabitEthernet0/0/1]rip authentication-mode md5 usual cipher 654321
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]rip a
[R2-GigabitEthernet0/0/0]rip authentication-mode md5 us
[R2-GigabitEthernet0/0/0]rip authentication-mode md5 usual c
[R2-GigabitEthernet0/0/0]rip authentication-mode md5 usual cipher 123456
[R2-GigabitEthernet0/0/0]q
//R3
[R3]rip
[R3-rip-1]ver
[R3-rip-1]verify-source
[R3-rip-1]version 2
[R3-rip-1]int
[R3-rip-1]int g0/0/0
[R3-GigabitEthernet0/0/0]rip
[R3-GigabitEthernet0/0/0]rip a
[R3-GigabitEthernet0/0/0]rip authentication-mode md5 u
[R3-GigabitEthernet0/0/0]rip authentication-mode md5 usual c
[R3-GigabitEthernet0/0/0]rip authentication-mode md5 usual cipher 654321
//再次查看rip表格,R2从之前的无效时间,重新变成周期时间
[R2]display rip 1 route
Route Flags : R - RIP
A - Aging, G - Garbage-collect
----------------------------------------------------------------------------
Peer 192.168.1.1 on GigabitEthernet0/0/0
Destination/Mask Nexthop Cost Tag Flags Sec
192.168.1.32/27 192.168.1.1 16 0 RG 104
[R2]display rip 1 route
Route Flags : R - RIP
A - Aging, G - Garbage-collect
----------------------------------------------------------------------------
Peer 192.168.1.1 on GigabitEthernet0/0/0
Destination/Mask Nexthop Cost Tag Flags Sec
192.168.1.32/27 192.168.1.1 1 0 RA 3
此时R1和R3之间互相ping通
//R1
<R1>ping 192.168.1.6
PING 192.168.1.6: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.6: bytes=56 Sequence=1 ttl=254 time=70 ms
Reply from 192.168.1.6: bytes=56 Sequence=2 ttl=254 time=10 ms
Reply from 192.168.1.6: bytes=56 Sequence=3 ttl=254 time=30 ms
Reply from 192.168.1.6: bytes=56 Sequence=4 ttl=254 time=20 ms
Reply from 192.168.1.6: bytes=56 Sequence=5 ttl=254 time=30 ms
--- 192.168.1.6 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 10/32/70 ms
//R3
<R3>ping 192.168.1.1
PING 192.168.1.1: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.1: bytes=56 Sequence=1 ttl=254 time=40 ms
Reply from 192.168.1.1: bytes=56 Sequence=2 ttl=254 time=30 ms
Reply from 192.168.1.1: bytes=56 Sequence=3 ttl=254 time=20 ms
Reply from 192.168.1.1: bytes=56 Sequence=4 ttl=254 time=20 ms
Reply from 192.168.1.1: bytes=56 Sequence=5 ttl=254 time=30 ms
--- 192.168.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/28/40 ms
完成!!!
标签:练习,R1,R2,R3,GigabitEthernet0,配置,RIP,rip,192.168 来源: https://blog.csdn.net/qq_44685426/article/details/121368061
本站声明: 1. iCode9 技术分享网(下文简称本站)提供的所有内容,仅供技术学习、探讨和分享; 2. 关于本站的所有留言、评论、转载及引用,纯属内容发起人的个人观点,与本站观点和立场无关; 3. 关于本站的所有言论和文字,纯属内容发起人的个人观点,与本站观点和立场无关; 4. 本站文章均是网友提供,不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属;如您发现该文章侵犯了您的权益,可联系我们第一时间进行删除; 5. 本站为非盈利性的个人网站,所有内容不会用来进行牟利,也不会利用任何形式的广告来间接获益,纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。