标签：function hardware code subgraph TVM std runtime backend
TVM实现hardware backend
官方的矩阵相加的示例如下：
2个矩阵相加的实现
for (int i = 0; i < n; ++i) {
C[i] = A[i] + B[i];
}
怎么优化？ 可以并行相加，如下
for (int bx = 0; bx < ceil(n / 64); ++bx) {
for (int tx = 0; tx < 64; ++tx) {
int i = bx * 64 + tx;
if (i < n) {
C[i] = A[i] + B[i];
}
}
}
其实，就是把循环继续拆，一个循环拆成2个循环。
常见问题
如何安装
请参见安装TVM。
如何添加新的硬件后端
如果硬件后端支持LLVM，可以通过在target中设置正确的target三元组，直接生成代码。
如果目标硬件是GPU，尝试使用cuda、opencl或vulkan后端。
如果目标硬件是特殊加速器，检查VTA：多功能张量加速器，将Codegen导入TVM。
对于上述所有情况，可能希望使用AutoTVM添加特定于目标的优化模板，参阅使用模板和AutoTVM进行自动调整。
除了使用LLVM的矢量化，可以利用硬件内部函数，嵌入微内核，参阅使用Tensorize利用硬件内部函数。
TVM与其它IR/DSL项目的关系
在深度学习系统中，通常有两个层次的IR抽象。TensorFlow的XLA和英特尔的NGRAPH，都使用计算图表示。这种表示是高级的，有助于执行通用优化，如内存重用、布局转换和自动微分。
TVM采用了一种低层次的表示，明确地表达了内存布局、并行模式、局部性和硬件原语等的选择。这一层次的IR更接近直接的目标硬件。低级IR采用了现有图像处理语言（如Halide, darkroom）和循环变换工具（如基于循环和多面体的分析）的思想。特别关注于表达深度学习工作负载（如重复性）、针对不同硬件后端的优化及嵌入框架，提供端到端编译堆栈。
TVM与libDNN、cuDNN的关系
TVM可以将这些库合并为外部调用。TVM的一个目标是能够生成高性能内核。将以一种渐进的方式发展TVM，因为将学习手动内核制作技术，作为DSL中的原语添加。
TVM和其它框架，如NNVM、XLA的区别？
在tvm看来，nnvm和xla都是计算图级别的优化，属于high level优化，注意做的是内存复用、布局转换和自动微分。
tvm采用的是一种low level的表示，进行的是内存布局、并行模式、局部性和硬件原语等优化。
TVM和libDNN、cuDNN关系？
tvm会去调用这些库，与这些库共存。
nnvm tensor operator
https://docs.tvm.ai/nnvm_top.html
分5个级别的op：
- level 1: 基础op（34个）
- level 2: 卷积op（6个）
- level 3: 其它tensor op（19个）
- level 4: 广播和约简op（39个）
- level 5: 视觉op（5个）
VTA：多功能张量加速器
多功能张量加速器（VTA）是一个开放、通用、可定制的深度学习加速器，具有完整的基于TVM的编译器堆栈。设计VTA是为了揭示主流深度学习加速器最显著和最常见的特征。TVM和VTA一起构成一个端到端的软硬件深度学习系统堆栈，包括硬件设计、驱动程序、JIT运行时和基于TVM的优化编译器堆栈。
VTA具有以下主要功能：
通用、模块化、开源硬件。
简化了部署到FPGA的工作流程。
模拟器对原型编译的支持在常规工作站上传递。
用于模拟和FPGA硬件后端的基于Pynq的驱动程序和JIT运行时。
端到端TVM堆栈集成。
将Codegen导入TVM
随着深度学习工作负载所针对的硬件设备数量不断增加，用户在各种设备上实现高性能所需的知识也不断增加。为了让数据科学家在开发新模型时，不必担心性能问题，硬件后端提供商要么为MKLDNN或cuDNN等库，提供许多常用的深度学习算子，要么提供TensorRT等框架，让用户以某种方式描述其模型，实现高性能。然而，当用户尝试在新的库或设备上工作时，必须学习新的编程接口。因此，对统一编程接口的需求变得越来越重要。
1）让所有用户和硬件后端提供商站在同一个页面上，
2）提供一个可行的解决方案，允许专用硬件或库，仅支持广泛使用的具有极高性能的运营商，但将不受支持的算子回退到CPU/GPU等常规设备。
将演示作为硬件后端提供商，如何轻松实现自己的codegen，将注册为Relay后端编译器，支持硬件设备/库。介绍了两种基于所需不同图形表示的codegen：
- 生成C代码。
如果硬件已经有一个经过良好优化的C/C++库，如Intel CBLAS/MKL到CPU和NVIDIA CUBLAS到GPU，那么这就是需要的。幸运的是，C源代码模块与TVM运行时模块完全兼容，生成的代码可以由任何具有适当编译标志的C/C++编译器编译，因此唯一的任务是实现一个codegen，为子图生成C代码，实现一个C源模块，集成到TVM运行时模块中。在下一节中，将演示如何为硬件实现C代码生成器。
- 希望生成任何其它图形表示。
硬件可能需要其它形式的图形表示，如JSON。在这种情况下，不仅需要实现codegen，还需要实现定制的TVM Runtime模块，以让TVM Runtime知道应该如何实现图形表示。如果已经有一个完整的用于硬件图形实现引擎，如GPU的TyRoSRT，这是一个可以考虑的解决方案。
完成codegen和Runtime后，可以让用户使用自定义标记，对模型进行注释利用。最终用户注释和启动特定codegen的教程在这里（TBA）。
实现一个C代码生成器
在这一部分中，将演示如何实现一个codegen，该codegen使用预实现的算子函数，生成C代码。为了简化，示例codegen不依赖于第三方库。相反，在C中手动实现两个宏：
#define CSOURCE_BINARY_OP_1D(p_ID_, p_OP_, p_DIM1_) \
extern "C" void p_ID_(float* a, float* b, float* out) { \
for (int64_t i = 0; i < p_DIM1_; ++i) { \
out[i] = a[i] p_OP_ b[i]; \
} \
}
#define CSOURCE_BINARY_OP_2D(p_ID_, p_OP_, p_DIM1_, p_DIM2_) \
extern "C" void p_ID_(float* a, float* b, float* out) { \
for (int64_t i = 0; i < p_DIM1_; ++i) { \
for (int64_t j = 0; j < p_DIM2_; ++j) { \
int64_t k = i * p_DIM2_ + j; \
out[k] = a[k] p_OP_ b[k]; \
} \
} \
}
使用这两个宏，可以生成一维和二维张量的二元运算符。如给定一个子图，如下所示。假设所有输入都是shape为（10,10）的二维张量。
c_compiler_input0
|
add <-- c_compiler_input1
|
subtract <-- c_compiler_input2
|
multiply <-- c_compiler_input3
|
out
目标是生成以下可编译代码，实现子图：
#include <tvm/runtime/c_runtime_api.h>
#include <tvm/runtime/packed_func.h>
#include <dlpack/dlpack.h>
#include <cstdint>
#include <cstring>
#include <iostream>
#define GCC_BINARY_OP_1D(p_ID_, p_OP_, p_DIM1_) \
extern "C" void p_ID_(float* a, float* b, float* out) { \
for (int64_t i = 0; i < p_DIM1_; ++i) { \
out[i] = a[i] p_OP_ b[i]; \
} \
}
#define GCC_BINARY_OP_2D(p_ID_, p_OP_, p_DIM1_, p_DIM2_) \
extern "C" void p_ID_(float* a, float* b, float* out) { \
for (int64_t i = 0; i < p_DIM1_; ++i) { \
for (int64_t j = 0; j < p_DIM2_; ++j) { \
int64_t k = i * p_DIM2_ + j; \
out[k] = a[k] p_OP_ b[k]; \
} \
} \
}
// Note 1
GCC_BINARY_OP_2D(gcc_0_0, *, 10, 10);
GCC_BINARY_OP_2D(gcc_0_1, -, 10, 10);
GCC_BINARY_OP_2D(gcc_0_2, +, 10, 10);
// Note 2
extern "C" void gcc_0_(float* gcc_input0, float* gcc_input1,
float* gcc_input2, float* gcc_input3, float* out) {
float* buf_0 = (float*)malloc(4 * 100);
float* buf_1 = (float*)malloc(4 * 100);
gcc_0_2(gcc_input0, gcc_input1, buf_0);
gcc_0_1(buf_0, gcc_input2, buf_1);
gcc_0_0(buf_1, gcc_input3, out);
free(buf_0);
free(buf_1);
}
// Note 3
extern "C" int gcc_0_wrapper(DLTensor* arg0, DLTensor* arg1, DLTensor* arg2,
DLTensor* arg3, DLTensor* out) {
gcc_0_(static_cast<float*>(arg0->data), static_cast<float*>(arg1->data),
static_cast<float*>(arg2->data), static_cast<float*>(arg3->data),
static_cast<float*>(out->data));
return 0;
}
TVM_DLL_EXPORT_TYPED_FUNC(gcc_0, gcc_0_wrapper);
Here we highlight the notes marked in the above code:
- Note 1 is the function implementation for the three nodes in the subgraph.
- Note 2 is a function to execute the subgraph by allocating intermediate buffers and invoking corresponding functions.
- Note 3 is a TVM runtime compatible wrapper function. It accepts a list of input tensors and one output tensor (the last argument), casts them to the right data type, and invokes the subgraph function described in Note 2. In addition, TVM_DLL_EXPORT_TYPED_FUNC is a TVM macro that generates another function gcc_0 with unified the function arguments by packing all tensors to TVMArgs. As a result, the TVM runtime can directly invoke gcc_0 to execute the subgraph without additional efforts. With the above code generated, TVM is able to compile it along with the rest parts of the graph and export a single library for deployment.
In the rest of this section, we will implement a codegen step-by-step to generate the above code. Your own codegen has to be located at src/relay/backend/contrib/<your-codegen-name>/. In our example, we name our codegen “codegen_c” and put it under /src/relay/backend/contrib/codegen_c/. Feel free to check this file for a complete implementation.
Specifically, we are going to implement two classes in this file and here is their relationship:
subgraph subgraph
TVM backend -----------------------------> CSourceCodegen -------------> CodegenC
^ | ^ |
| | | |
---------------------------------------- ------------------------
generated C source runtime module generated C code
When TVM backend finds a function (subgraph) in a Relay graph is annotated with the registered compiler tag (ccompiler in this example), TVM backend invokes CSourceCodegen and passes the subgraph. CSourceCodegen’s member function CreateCSourceModule will 1) generate C code for the subgraph, and 2) wrap the generated C code to a C source runtime module for TVM backend to compile and deploy. In particular, the C code generation is transparent to the CodegenC class because it provides many useful utilities to ease the code generation implementation. The following sections will implement these two classes in the bottom-up order.
Implement CodegenC
In src/relay/backend/contrib/codegen_c/codegen.cc, we first create a codegen class skeleton under the namespace of tvm.relay.contrib:
#include <tvm/relay/expr_functor.h>
#include <tvm/relay/transform.h>
#include <tvm/relay/type.h>
#include <tvm/runtime/module.h>
#include <tvm/runtime/object.h>
#include <fstream>
#include <sstream>
#include "codegen_c.h"
namespace tvm {
namespace relay {
namespace contrib {
class CodegenC : public ExprVisitor, public CodegenCBase {
public:
explicit CodegenC(const std::string& id) { this->ext_func_id_ = id; }
void VisitExpr_(const VarNode* node) { ; }
void VisitExpr_(const CallNode* call) final { ; }
std::string JIT() { ; }
private:
/*! \brief The function id that represents a C source function. */
std::string ext_func_id_ = "";
/*! \brief The index of a wrapped C function. */
int func_idx = 0;
/*! \brief The index of allocated buffers. */
int buf_idx_ = 0;
/*! \brief The arguments of a C compiler compatible function. */
std::vector<std::string> ext_func_args_;
/*! \brief The statements of a C compiler compatible function. */
std::vector<std::string> ext_func_body;
/*! \brief The declaration statements of a C compiler compatible function. */
std::vector<std::string> func_decl_;
/*! \brief The declaration statements of buffers. */
std::vector<std::string> buf_decl_;
/*! \brief The name and index pairs for output. */
std::vector<std::pair<std::string, int>> out_;
}
The CodegenC class inherits two classes: ExprVisitor provides abilities to traverse subgraphs and collects the required information and generate subgraph functions such as gcc_0_; CodegenCBase provides abilities and utilities to generate wrapper functions such as gcc_0 in the above example. As can be seen, we only need to implement three functions in this codegen class to make it work.
Code Generation for Operators
We first implement VisitExpr_(const CallNode* call). This function visits all call nodes when traversing the subgraph. Each call node contains an operator that we want to offload to your hardware. As a result, we need to generate the corresponding C code with correct operators in topological order. We implement this function step-by-step as follows.
1. Generate the function declaration
Example Result: GCC_BINARY_OP_2D(gcc_0_0, *, 10, 10);
To generate the function declaration, as shown above, we need 1) a function name (e.g., gcc_0_0), 2) the type of operator (e.g., *), and 3) the input tensor shape (e.g., (10, 10)). Fortunately, this information can be obtained easily from CallNode:
std::ostringstream macro_stream;
std::ostringstream decl_stream;
std::ostringstream buf_stream;
// Generate a unique function name you like.
std::string func_name = ext_func_id_ + "_" + std::to_string(func_idx++);
// Make function declaration string.
macro_stream << "CSOURCE_BINARY_OP_" << call->args.size() << "D(" << func_name << ", ";
// Check the operator type.
if (IsOp(call, "add")) {
macro_stream << "+";
} else if (IsOp(call, "subtract")) {
macro_stream << "-";
} else if (IsOp(call, "multiply")) {
macro_stream << "*";
} else {
LOG(FATAL) << "Unrecognized op";
}
// Extract the input tensor shape.
auto in_shape = GetShape(call->args[0]->checked_type());
for (size_t i = 0; i < in_shape.size(); ++i) {
macro_stream << ", " << in_shape[i];
}
macro_stream << ");";
func_decl_.push_back(macro_stream.str());
As can be seen, we push the generated code to class member variables func_decl_. It means after we finish traversing the entire subgraph, we have collected all required function declarations and the only thing we need to do is having them compiled by GCC. The rest implementation of VisitExpr_(const CallNode* call) also follow this concept.
2. Generate the function call
Example Result: gcc_0_0(buf_1, gcc_input3, out);
After generating the function declaration, we need to generate a function call with proper inputs and outputs. To know which inputs or buffers we should put when calling this function, we have to visit its arguments:
bool first = true;
decl_stream << func_name << "(";
for (size_t i = 0; i < call->args.size(); ++i) {
VisitExpr(call->args[i]); // Note 1
for (auto out : out_) {
if (!first) {
decl_stream << ", ";
}
first = false;
decl_stream << out.first;
}
}
// Note 2
Again, we want to highlight the notes in the above code:
Note 1: VisitExpr(call->args[i]) is a recursive call to visit arguments of the current function. An argument could be an output of another node or an input tensor. In our example implementation, we make sure every node updates a class variable out_ before leaving the visitor. Here is an illustration:
arg_node arg_node <- Visit arg (Note 1) arg_node
| | |
curr_node <- Process curr_node curr_node <- Put "buf_0" as an input buffer
(a) out_ = {} (b) out_ = {} (c) out_ = {("buf_0", 20)}
We can see in the above figure, class variable out_ is empty before visiting the argument node, and it was filled with the output buffer name and size of arg_node. As a result, when we finished visiting the argument node, we know the proper input buffer we should put by looking at out_. You will find out how we update out_ at the end of this section as well as the next section.
Note 2: You may notice that we did not close the function call string in this step. The current function call string looks like: gcc_0_0(buf_1, gcc_input3. This is because we have not put the last argument (i.e., the output) to this call. The output of a function call could be either an allocated temporary buffer or the subgraph output tensor. For simplify, in this example, we allocate an output buffer for every call node (next step) and copy the result in the very last buffer to the output tensor.
3. Generate the output buffer
Example Result: float* buf_0 = (float*)malloc(4 * 100);
As mentioned in the previous step, in addition to the subgraph input and output tensors, we may also need buffers to keep the intermediate results. To generate the buffer, we extract the shape information to determine the buffer type and size:
// This example only supports single output.
auto type_node = call->checked_type().as<TensorTypeNode>();
ICHECK(type_node != nullptr && runtime::TypeMatch(type_node->dtype, kDLFloat, 32))
<< "Only support single output tensor with float type";
// Generate a unique buffer name.
std::string out = "buf_" + std::to_string(buf_idx_++);
// Extract the shape to be the buffer size.
auto out_shape = GetShape(call->checked_type());
int out_size = 1;
for (size_t i = 0; i < out_shape.size(); ++i) {
out_size *= out_shape[i];
}
// Make the buffer allocation and push to the buffer declarations.
buf_stream << "float* " << out << " = (float*)std::malloc(4 * " << out_size << ");";
buf_decl_.push_back(buf_stream.str());
After we have allocated the output buffer, we can now close the function call string and push the generated function call to a class variable ext_func_body.
decl_stream << ", " << out << ");";
ext_func_body.push_back(decl_stream.str());
4. Update output buffer
To let the next node, which accepts the output of the current call node as its input, know which buffer it should take, we need to update the class variable out_ before leaving this visit function:
out_.clear();
out_.push_back({out, out_size});
Congratulations! we have finished the most difficult function in this class. In the next two sections, we just need to make up some minor missing parts in this function.
Code Generation for Input Variables
Recall that we collected the input buffer information by visiting the arguments of a call node (2nd step in the previous section), and handled the case when its argument is another call node (4th step). In this section, we demonstrate how to handle other nodes by taking VarNode as an example.
VarNode represents input tensors in a model. The only but important information it has is a name hint (e.g., data, weight, etc). When visiting a VarNode, we simply update class variable out_ to pass the name hint so that the descendant call nodes can generate the correct function call.
void VisitExpr_(const VarNode* node) {
ext_func_args_.push_back(node->name_hint());
out_.clear();
out_.push_back({node->name_hint(), 0});
}
Note that in this example we assume the subgraph we are offloading has only call nodes and variable nodes. If your subgraphs contain other types of nodes, such as TupleNode, then you also need to visit them and bypass the output buffer information.
Code Emitting
The final part in this codegen class is a JIT function that emits a C function for the subgraph and uses the C code we just generated as the function body. Remember, in addition to the subgraph function we generated in the previous sections, we also need a wrapper function with a unified argument for TVM runtime to invoke and pass data. Fortunately, the base class we inherited already provides an implementation, JitImpl, to generate the function. For example, we can invoke JitImpl as follows:
JitImpl("gcc_0" /* Subgraph symbol (ID) */,
{"gcc_input0", "gcc_input1", "gcc_input2", "gcc_input3"} /* Input arguments */,
{"float *buf_0 = (float*)malloc(4 * 20)", ...} /* Buffer allocations */,
{"gcc_0_2(gcc_input0, gcc_input1, buf_0);"} /* Function body */,
{"out"} /* Output */);
The above call will generate three functions (one from the TVM wrapper macro):
1. The subgraph function gcc_0_ (with one more underline at the end of the function name) with all C code we generated to execute a subgraph.
2. The wrapper function gcc_0__wrapper_ with a list of DLTensor arguments that casts data to the right type and invokes gcc_0_.
3. The TVM runtime compatible function gcc_0 with TVM unified function arguments that unpacks TVM packed tensors and invokes gcc_0__wrapper_.
Accordingly, the only thing we need in JIT implementation is passing all subgraph function code we generated to JitImpl:
std::string JIT() {
// Write function macros
for (auto decl : func_decl_) {
code_stream_ << decl << "\n";
}
return JitImpl(ext_func_id_, ext_func_args_, buf_decl_, ext_func_body, out_);
}
All variables (ext_func_id, etc) we passed are class variables and were filled when we traversed the subgraph.
Implement CSourceCodegen
Again, let’s create a class skeleton and implement the required functions. Note that it inherits CSourceModuleCodegenBase
class CSourceCodegen : public CSourceModuleCodegenBase {
public:
// Pass a subgraph function, and generate the C code.
void GenCFunc(const Function& func) { ; }
// Use GenCFunc to generate the C code and wrap it as a C source module.
runtime::Module CreateCSourceModule(const NodeRef& ref) override { ; }
private:
std::ostringstream code_stream_;
};
Implement GenCFunc
GenCFunc simply uses the CodegenC we just implemented to traverse a Relay function (subgraph) and obtains the generated C code. The builtin function GetExtSymbol retrieves a unique symbol name (e.g., gcc_0) in the Relay function and we must use it as the C function name, because this symbol is going to be used for DSO runtime lookup.
void GenCFunc(const Function& func) {
ICHECK(func.defined()) << "Input error: expect a Relay function.";
// Record the external symbol for runtime lookup.
auto sid = GetExtSymbol(func);
CodeGenC builder(sid);
builder.VisitExpr(func->body);
code_stream_ << builder.JIT();
}
Implement CreateCSourceModule
This function creates a runtime module for the external library. In this example, we create a CSourceModule that can be directly compiled and linked together with a TVM generated DSOModule. After you have implemented CodegenC, implementing this function is relatively straightforward:
runtime::Module CreateCSourceModule(const NodeRef& ref) override {
// Create headers
code_stream_ << "#include <cstdint>\n";
code_stream_ << "#include <iostream>\n";
code_stream_ << "#include <cstdlib>\n";
code_stream_ << "#include <stdio.h>\n";
code_stream_ << "#include <cstring>\n";
code_stream_ << "#include <tvm/runtime/c_runtime_api.h>\n";
code_stream_ << "#include <dlpack/dlpack.h>\n";
// Append some common macro for operator definition.
const char* operator_macro = R"op_macro(
#define CSOURCE_BINARY_OP_1D(p_ID_, p_OP_, p_DIM1_) \
extern "C" void p_ID_(float* a, float* b, float* out) { \
for (int64_t i = 0; i < p_DIM1_; ++i) { \
out[i] = a[i] p_OP_ b[i]; \
} \
}
#define CSOURCE_BINARY_OP_2D(p_ID_, p_OP_, p_DIM1_, p_DIM2_) \
extern "C" void p_ID_(float* a, float* b, float* out) { \
for (int64_t i = 0; i < p_DIM1_; ++i) { \
for (int64_t j = 0; j < p_DIM2_; ++j) { \
int64_t k = i * p_DIM2_ + j; \
out[k] = a[k] p_OP_ b[k]; \
} \
} \
}
)op_macro";
code_stream_ << operator_macro << "\n\n";
// Generate C code for the subgraph.
if (ref->IsInstance<FunctionNode>()) {
GenCFunc(Downcast<Function>(ref));
} else if (ref->IsInstance<relay::ModuleNode>()) {
relay::Module mod = Downcast<relay::Module>(ref);
for (const auto& it : mod->functions) {
GenCFunc(Downcast<Function>(it.second));
}
} else {
LOG(FATAL) << "The input ref is expected to be a Relay function or module"
<< "\n";
}
// Create a CSourceModule
const auto* pf = runtime::Registry::Get("module.csource_module_create");
ICHECK(pf != nullptr) << "Cannot find csource module to create the external runtime module";
return (*pf)(code_stream_.str(), "cc");
}
Register Your Codegen
The last step is registering your codegen to TVM backend. We first implement a simple function to invoke our codegen and generate a runtime module.
runtime::Module CCompiler(const NodeRef& ref) {
CSourceCodegen csource;
return csource.CreateCSourceModule(ref);
}
Finally, we register this function to TVM backend:
TVM_REGISTER_GLOBAL("relay.ext.ccompiler").set_body_typed(CCompiler);
where ccompiler is a customized tag to let TVM know this is the codegen it should use to generate and offload subgraphs when the subgraph is annotated with ccompiler.
Finally, a good practice is to set up a CMake configuration flag to include your compiler only for your customers. We first create a cmake file: cmake/modules/contrib/CODEGENC.cmake:
if(USE_CODEGENC)
file(GLOB CSOURCE_RELAY_CONTRIB_SRC src/relay/backend/contrib/codegen_c/codegen.cc)
list(APPEND COMPILER_SRCS ${CSOURCE_RELAY_CONTRIB_SRC})
endif(USE_CODEGENC)
So that users can configure whether to include your compiler when configuring TVM using config.cmake:
set(USE_CODEGENC ON)
Implement a Codegen for Your Representation
Although we have demonstrated how to implement a C codegen, your hardware may require other forms of graph representation, such as JSON. In this case, you could modify CodegenC class we have implemented to generate your own graph representation and implement a customized runtime module to let TVM runtime know how this graph representation should be executed.
To simplify, we define a graph representation named “ExampleJSON” in this guide. ExampleJSON does not mean the real JSON but just a simple representation for graphs without a control flow. For example, assuming we have the following subgraph named subgraph_0:
input0
|
add <-- input1
|
subtract <-- input2
|
multiply <-- input3
|
out
Then the ExampleJON of this subgraph looks like:
subgraph_0
input 0 10 10
input 1 10 10
input 2 10 10
input 3 10 10
add 4 inputs: 0 1 shape: 10 10
sub 5 inputs: 4 2 shape: 10 10
mul 6 inputs: 5 3 shape: 10 10
The input keyword declares an input tensor with its ID and shape; while the other statements describes computations in <op> <output ID> inputs: [input ID] shape: [shape] syntax.
In this section, our goal is to implement the following customized TVM runtime module to execute ExampleJSON graphs.
runtime::Module ExampleJsonCompiler(const NodeRef& ref) {
ExampleJsonCodeGen codegen(ref);
std::string code = codegen.gen(); // Note 1
const auto* pf = runtime::Registry::Get("module.examplejson_module_create"); // Note 2
ICHECK(pf != nullptr) << "Cannot find ExampleJson module to create the external runtime module";
return (*pf)(code);
}
TVM_REGISTER_GLOBAL("relay.ext.examplejsoncompiler").set_body_typed(ExampleJsonCompiler);
Note 1: We will implement a customized codegen later to generate a ExampleJSON code string by taking a subgraph.
Note 2: This line obtains a pointer to a function for creating the customized runtime module. You can see that it takes subgraph code in ExampleJSON format we just generated and initializes a runtime module.
In the following sections, we are going to introduce 1) how to implement ExampleJsonCodeGen and 2) how to implement and register examplejson_module_create.
Implement ExampleJsonCodeGen
Similar to the C codegen, we also derive ExampleJsonCodeGen from ExprVisitor to make use of visitor patterns for subgraph traversing. On the other hand, we do not have to inherit CodegenCBase because we do not need TVM C++ wrappers. The codegen class is implemented as follows:
#include <tvm/relay/expr_functor.h>
#include <tvm/relay/transform.h>
#include <tvm/relay/type.h>
#include <tvm/runtime/module.h>
#include <tvm/runtime/object.h>
#include <fstream>
#include <sstream>
namespace tvm {
namespace relay {
namespace contrib {
class ExampleJsonCodeGen : public ExprVisitor {
public:
explicit ExampleJsonCodeGen();
// Note 1
void VisitExpr_(const VarNode* node) { /* Skip in this example. */ }
void VisitExpr_(const CallNode* call) final { /* Skip in this example. */ }
// Note 2
std::string gen(NodeRef& ref) {
this->code = "";
if (ref->IsInstance<FunctionNode>()) {
this->visit(Downcast<Function>(ref));
} else if (ref->IsInstance<relay::ModuleNode>()) {
relay::Module mod = Downcast<relay::Module>(ref);
for (const auto& it : mod->functions) {
this->visit(Downcast<Function>(it.second));
}
} else {
LOG(FATAL) << "The input ref is expected to be a Relay function or module";
}
return this->code;
}
private:
/*! \brief The function id that represents a C source function. */
std::string code;
}
Note 1: We again implement corresponding visitor functions to generate ExampleJSON code and store it to a class variable code (we skip the visitor function implementation in this example as their concepts are basically the same as C codegen). After finished the graph visiting, we should have an ExampleJSON graph in code.
Note 2: We define an internal API gen to take a subgraph and generate a ExampleJSON code. This API can be in an arbitrary name you prefer.
The next step is to implement a customized runtime to make use of the output of ExampleJsonCodeGen.
Implement a Customized Runtime
In this section, we will implement a customized TVM runtime step-by-step and register it to TVM runtime modules. The customized runtime should be located at src/runtime/contrib/<your-runtime-name>/. In our example, we name our runtime “example_ext_runtime”.
Again, we first define a customized runtime class as follows. The class has to be derived from TVM ModuleNode in order to be compatible with other TVM runtime modules.
#include <dmlc/logging.h>
#include <tvm/runtime/c_runtime_api.h>
#include <tvm/runtime/memory.h>
#include <tvm/runtime/module.h>
#include <tvm/runtime/ndarray.h>
#include <tvm/runtime/object.h>
#include <tvm/runtime/packed_func.h>
#include <tvm/runtime/registry.h>
#include <fstream>
#include <cmath>
#include <map>
#include <sstream>
#include <string>
#include <vector>
namespace tvm {
namespace runtime {
class ExampleJsonModule : public ModuleNode {
public:
explicit ExampleJsonModule(std::string graph_json);
PackedFunc GetFunction(const std::string& name,
const ObjectPtr<Object>& sptr_to_self) final;
const char* type_key() const { return "examplejson"; }
void SaveToBinary(dmlc::Stream* stream) final;
static Module LoadFromBinary(void* strm);
static Module Create(const std::string& path);
std::string GetSource(const std::string& format = "");
void Run(int id, const std::vector<int>& inputs, int output);
void ParseJson(const std::string& json);
private:
/* \brief The json string that represents a computational graph. */
std::string graph_json_;
/* \brief The subgraph that being processed. */
std::string curr_subgraph_;
/*! \brief A simple graph from subgraph id to node entries. */
std::map<std::string, std::vector<NodeEntry> > graph_;
/* \brief A simple pool to contain the tensor for each node in the graph. */
std::vector<NDArray> data_entry_;
/* \brief A mapping from node id to op name. */
std::vector<std::string> op_id_;
};
In particular, there are some functions derived from ModuleNode that we must implement in ExampleJsonModule:
- Constructor: The constructor of this class should accept a subgraph (in your representation), process and store it in any format you like. The saved subgraph could be used by the following two functions.
- GetFunction: This is the most important function in this class. When TVM runtime wants to execute a subgraph with your compiler tag, TVM runtime invokes this function from your customized runtime module. It provides the function name as well as runtime arguments, and GetFunction should return a packed function implementation for TVM runtime to execute.
- SaveToBinary and LoadFromBinary: SaveToBinary serialize the runtime module to a binary format for later deployment. This function will be called by TVM when users use export_library API. On the other hand, since we are now using our own graph representation, we have to make sure that LoadFromBinary is able to construct the same runtime module by taking the serialized binary generated by SaveToBinary.
- GetSource (optional): If you would like to see the generated ExampleJSON code, you can implement this function to dump it; otherwise you can skip the implementation.
Other functions and class variables will be introduced along with the implementation of above must-have functions.
Implement Constructor
explicit ExampleJsonModule(std::string graph_json) {
this->graph_json_ = graph_json;
ParseJson(this->graph_json_);
}
Then, we implement ParseJson to parse a subgraph in ExampleJSON format and construct a graph in memory for later usage. Since we do not support subgraph with branches in this example, we simply use an array to store every nodes in a subgraph in order.
void ParseJson(const std::string& json) {
std::string line;
std::string curr_subgraph;
std::stringstream ss(json);
while (std::getline(ss, line, '\n')) {
std::stringstream ss2(line);
std::string token;
int id = 0;
ss2 >> token;
if (token.find("subgraph_") != std::string::npos) {
curr_subgraph = token;
continue;
}
ss2 >> id;
if (op_id_.size() <= static_cast<size_t>(id)) {
op_id_.resize(id + 1);
data_entry_.resize(id + 1);
}
int64_t total_elements = 1;
std::vector<int64_t> shape;
if (token == "input") {
int64_t size = 0;
while (ss2 >> size) {
total_elements *= size;
shape.push_back(size);
}
} else {
op_id_[id] = token; // Note 1
bool shape_data = false;
NodeEntry entry;
while (ss2 >> token) {
if (token == "shape:") {
shape_data = true;
} else if (shape_data) {
total_elements *= std::stoll(token);
shape.push_back(std::stoll(token));
} else if (token != "inputs:") {
entry.inputs.push_back(std::stoi(token));
}
}
entry.id = id;
entry.output = id;
graph_[curr_subgraph].push_back(entry); // Note 2
}
DLDevice dev;
dev.device_type = static_cast<DLDeviceType>(1);
dev.device_id = 0;
data_entry_[id] = NDArray::Empty(shape, DLDataType{kDLFloat, 32, 1}, dev); // Note 3
}
}
Note 1: We use a class variable op_id_ to map from subgraph node ID to the operator name (e.g., add) so that we can invoke the corresponding operator function in runtime.
Note 2: We use a class variable graph_ to map from subgraph name to an array of nodes. GetFunction will query graph nodes by a subgraph ID in runtime.
Note 3: We use a class variable data_entry_ to map from a subgraph node ID to a tensor data placeholder. We will put inputs and outputs to the corresponding data entry in runtime.
Implement GetFunction
After the construction, we should have the above class variables ready. We then implement GetFunction to provide executable subgraph functions to TVM runtime:
PackedFunc GetFunction(const std::string& name,
const ObjectPtr<Object>& sptr_to_self) final {
if (this->graph_.find(name) != this->graph_.end()) {
this->curr_subgraph_ = name;
return PackedFunc([sptr_to_self, this](TVMArgs args, TVMRetValue* rv) {
// Copy input tensors to corresponding data entries.
for (auto i = 0; i < args.size(); ++i) {
ICHECK(args[i].type_code() == kNDArrayContainer || args[i].type_code() == kArrayHandle)
<< "Expect NDArray or DLTensor as inputs\n";
if (args[i].type_code() == kArrayHandle) {
DLTensor* arg = args[i];
this->data_entry_[i].CopyFrom(arg);
} else {
NDArray arg = args[i];
this->data_entry_[i].CopyFrom(arg);
}
}
// Execute the subgraph.
for (const auto& it : this->graph_[this->curr_subgraph_]) {
this->Run(it.id, it.inputs, it.output);
}
ICHECK_GT(graph_.count(this->curr_subgraph_), 0U);
// Copy the output from a data entry back to TVM runtime argument.
auto out_idx = graph_[this->curr_subgraph_].back().output;
if (args[args.size() - 1].type_code() == kArrayHandle) {
DLTensor* arg = args[args.size() - 1];
this->data_entry_[out_idx].CopyTo(arg);
} else {
NDArray arg = args[args.size() - 1];
this->data_entry_[out_idx].CopyTo(arg);
}
*rv = data_entry_.back();
});
} else {
LOG(FATAL) << "Unknown subgraph: " << name << "\n";
return PackedFunc();
}
}
As can be seen, GetFunction is composed of three major parts. The first part copies data from TVM runtime arguments to the corresponding data entries we assigned in the constructor. The second part executes the subgraph with Run function (will implement later) and saves the results to another data entry. The third part copies the results from the output data entry back to the corresponding TVM runtime argument for output.
Implement Run
Now let’s implement Run function. This function accepts 1) a subgraph ID, 2) a list of input data entry indexs, and 3) an output data entry index.
void Run(int id, const std::vector<int>& inputs, int output) {
// Make a list data entry indexs.
std::vector<int> args(inputs.begin(), inputs.end());
args.push_back(output);
// Initialize data holders.
std::vector<TVMValue> values(args.size());
std::vector<int> type_codes(args.size());
// Initialize a TVM arg setter with TVMValue and its type code.
TVMArgsSetter setter(values.data(), type_codes.data());
// Set each argument to its corresponding data entry.
if (op_id_[id] == "add" || op_id_[id] == "sub" || op_id_[id] == "mul") {
for (size_t i = 0; i < args.size(); i++) {
setter(i, data_entry_[args[i]]);
}
}
// Invoke the corresponding operator function.
if (op_id_[id] == "add") {
Add(values.data(), type_codes.data(), args.size());
} else if (op_id_[id] == "sub") {
Sub(values.data(), type_codes.data(), args.size());
} else if (op_id_[id] == "mul") {
Mul(values.data(), type_codes.data(), args.size());
} else {
LOG(FATAL) << "Unknown op: " << op_id_[id] << "\n";
}
}
Run function mainly has two parts. The first part allocates a list of TVMValue, and maps corresponding data entry blocks. This will become the arguments of our operator functions. The second part than invokes our operator functions. Although we use the same C functions as the previous example, you can replace Add, Sub, and Mul with your own engine. You only need to make sure your engine stores the results to the last argument so that they can be transferred back to TVM runtime.
With above functions implemented, our customized codegen and runtime can now execute subgraphs. The last step is registering an API (examplejson_module_create) to create this module:
TVM_REGISTER_GLOBAL("module.examplejson_module_create")
.set_body_typed([](std::string code){
auto n = make_object<ExampleJsonModule>(code);
return runtime::Module(n);
});
Implement SaveToBinary and LoadFromBinary
So far we have implemented the main features of a customized runtime so that it can be used as other TVM runtimes. However, when users want to save the built runtime to a disk for deployment, TVM has no idea about how to save it. This is the reason we want to implement SaveToBinary and LoadFromBinary, which tell TVM how should this customized runtime be persist and restored.
We first implement SaveToBinary function to allow users to save this module in disk.
void SaveToBinary(dmlc::Stream* stream) final {
stream->Write(this->graph_json_);
}
We can find that this function is pretty simple. Recall that the only argument we took in constructor is a subgraph representation, meaning that we only need a subgraph representation to construct/recover this customized runtime module. As a result, SaveToBinary simply writes the subgraph to an output DMLC stream. That is, when users use export_library API to export the module, the customized module will be an ExampleJSON stream of a subgraph.
Similarity, LoadFromBinary reads the subgraph stream and re-constructs the customized runtime module:
static Module LoadFromBinary(void* strm) {
dmlc::Stream* stream = static_cast<dmlc::Stream*>(strm);
std::string graph_json;
stream->Read(&graph_json);
auto n = tvm::runtime::make_object<ExampleJsonModule>(graph_json);
return Module(n);
}
We also need to register this function to enable the corresponding Python API:
TVM_REGISTER_GLOBAL("module.loadbinary_examplejson")
.set_body_typed(ExampleJsonModule::LoadFromBinary);
The above registration means when users call tvm.runtime.load_module(lib_path) API and the exported library has an ExampleJSON stream, our LoadFromBinary will be invoked to create the same customized runtime module.
In addition, if you want to support module creation directly from an ExampleJSON file, you can also implement a simple function and register a Python API as follows:
static Module Create(const std::string& path) {
std::ifstream filep;
filep.open(path, std::ios::in);
std::string graph_json;
std::string line;
while (std::getline(filep, line)) {
graph_json += line;
graph_json += "\n";
}
filep.close();
auto n = tvm::runtime::make_object<ExampleJsonModule>(graph_json);
return Module(n);
}
TVM_REGISTER_GLOBAL("module.loadfile_examplejson")
.set_body([](TVMArgs args, TVMRetValue* rv) {
*rv = ExampleJsonModule::Create(args[0]);
});
It means users can manually write/modify an ExampleJSON file, and use Python API tvm.runtime.load_module("mysubgraph.examplejson", "examplejson") to construct a customized module.
Summary
In summary, here is a checklist for you to refer:
- A codegen class derived from ExprVisitor and CodegenCBase (only for C codegen) with following functions.
o VisitExpr_(const CallNode* call) to collect call node information.
o Other visitor functions you needed to collect subgraph information.
o JIT to generate subgraph code.
o Register codegen.
- A function to create CSourceModule (for C codegen).
- A runtime module class derived from ModuleNode with following functions (for your graph representation).
o Constructor.
o GetFunction to generate a TVM runtime compatible PackedFunc.
o Run to execute a subgraph.
o Register a runtime creation API.
o SaveToBinary and LoadFromBinary to serialize/deserialize customized runtime module.
o Register LoadFromBinary API to support tvm.runtime.load_module(your_module_lib_path).
o (optional) Create to support customized runtime module construction from subgraph file in your representation.
- An annotator to annotate a user Relay program to make use of your compiler and runtime (TBA).
参考链接：
https://tvm.apache.org/docs/faq.html
https://tvm.apache.org/docs/how_to/tune_with_autotvm/index.html#tutorials-autotvm-sec
https://tvm.apache.org/docs/how_to/work_with_schedules/tensorize.html#tutorials-tensorize
https://www.jianshu.com/p/7a8d93522b07
标签：function,hardware,code,subgraph,TVM,std,runtime,backend 来源： https://www.cnblogs.com/wujianming-110117/p/15547195.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。