ICode9
精准搜索请尝试： 精确搜索
首页
编程语言>
数据库
系统相关
互联网
其他分享
Python
Java
JavaScript
android
PHP
首页 > 其他分享> 文章详细

学习日记（路由与交换技术）——浮动静态路由和缺省路由

2021-11-02 23:31:06  阅读：174  来源： 互联网

标签：R1 R2 ip GigabitEthernet0 缺省 192.168 config 日记 路由


一、浮动静态路由

浮动静态路由的作用是实现备份路由

1、原理：如果链路发生故障，浮动静态路由即为主要静态或动态路由提供备份路径的静态路由。 浮动静态路由仅在主路由不可用时使用。 为了完成此操作，浮动静态路由配置了比主路由更高的管理距离

2、操作：浮动静态路由可配置为通过控制管理距离值来备份主链路。 通过配置浮动静态路由做到路由备份，实现在网络中路由的有备无患。

3、简单的例子

拓扑结构：

主机的IP地址：

 PC1

PC2

路由器的配置

Router 1:

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

R2(config)#host

R2(config)#hostname R1

R1(config)#int g 0/0

R1(config-if)#ip add

R1(config-if)#ip address 192.168.1.254 255.255.255.0（接口0/0 的IP地址）

R1(config-if)#no shu

R1(config-if)#no shutdown

R1(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

R1(config-if)#e

R1(config-if)#exit

R1(config)#int g 0/1

R1(config-if)#ip address 192.168.12.1 255.255.255.0（接口0/1 的IP地址）

R1(config-if)#no shutdown

R1(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up

R1(config-if)#e

R1(config)#int g 0/2

R1(config-if)#ip address 192.168.21.1 255.255.255.0（接口0/2 的IP地址）

R1(config-if)#no shutdown

R1(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to up

R1(config-if)#e

R1(config)#

R1(config)#ip route 192.168.2.0 255.255.255.0 192.168.12.2（配置静态路由）

R1(config)#ip route 192.168.2.0 255.255.255.0 192.168.21.2 10(10代表的是开销，只要比1大就好)（这一条就是备份的，也是浮动静态路由）

R1(config)#do show ip route（查看路由表信息）

Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR

P - periodic downloaded static route

Gateway of last resort is not set

192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.1.0/24 is directly connected, GigabitEthernet0/0

L 192.168.1.254/32 is directly connected, GigabitEthernet0/0

S 192.168.2.0/24 [1/0] via 192.168.12.2（[1/0] 1代表的是管理距离（管理距离越小，优先级越高）0代表的是开销 ）

192.168.12.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.12.0/24 is directly connected, GigabitEthernet0/1

L 192.168.12.1/32 is directly connected, GigabitEthernet0/1

192.168.21.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.21.0/24 is directly connected, GigabitEthernet0/2

L 192.168.21.1/32 is directly connected, GigabitEthernet0/2

R1(config)#

路由器2的配置跟1差不多相同

Router 2 :

R2(config-if)#e

R2(config-if)#exit

R2(config)#int g 0/1

R2(config-if)#ip address 192.168.12.2 255.255.255.0

R2(config-if)#no shutdown

R2(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up

R2(config-if)#e

R2(config)#int g 0/2

R2(config-if)#ip address 192.168.21.2 255.255.255.0

R2(config-if)#no shutdown

R2(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to up

R2(config-if)#e

R2(config)#ip route 192.168.1.0 255.255.255.0 192.168.12.1

R2(config)#ip route 192.168.1.0 255.255.255.0 192.168.21.1 10

R2#show ip route （特权模式下不用加 do）

Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR

P - periodic downloaded static route

Gateway of last resort is not set

S 192.168.1.0/24 [1/0] via 192.168.12.1

192.168.2.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.2.0/24 is directly connected, GigabitEthernet0/0

L 192.168.2.254/32 is directly connected, GigabitEthernet0/0

192.168.12.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.12.0/24 is directly connected, GigabitEthernet0/1

L 192.168.12.2/32 is directly connected, GigabitEthernet0/1

192.168.21.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.21.0/24 is directly connected, GigabitEthernet0/2

L 192.168.21.2/32 is directly connected, GigabitEthernet0/2

结果验证

PC1 ping PC2

 二、缺省路由

什么时候用到缺省路由呢？

答：当数据无论想去那个网络，都得通过那个路由器，这时候就可以把路由器设置成缺省（默认）路由。

例子：

相关代码：
Route 1:

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#host

Router(config)#hostname R1

R1(config)#in

R1(config)#int g

R1(config)#int gigabitEthernet 0/0

R1(config-if)#ip add

R1(config-if)#ip address 192.168.1.254 255.255.255.0

R1(config-if)#no sh

R1(config-if)#no shutdown

R1(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

R1(config-if)#e

R1(config-if)#exit

R1(config)#int g 0/1

R1(config-if)#ip add

R1(config-if)#ip address

R1(config-if)#ip address 192.168.3.254 255.255.255.0

R1(config-if)#no sh

R1(config-if)#no shutdown

R1(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up

R1(config-if)#e

R1(config-if)#exit

R1(config)#int g0/2

R1(config-if)#ip add

R1(config-if)#ip address 192.168.12.1 255.255.255.0

R1(config-if)#no sh

R1(config-if)#no shutdown

R1(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to up

R1(config-if)#e

R1(config-if)#exit

R1(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to up

R1(config)#ip route 0.0.0.0 0.0.0.0 192.168.12.2 （配置缺省路由，所有的目标网络表达为0.0.0.0 掩码为0.0.0.0）

R1(config)#do show ip route

Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR

P - periodic downloaded static route

Gateway of last resort is 192.168.12.2 to network 0.0.0.0

192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.1.0/24 is directly connected, GigabitEthernet0/0

L 192.168.1.254/32 is directly connected, GigabitEthernet0/0

192.168.3.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.3.0/24 is directly connected, GigabitEthernet0/1

L 192.168.3.254/32 is directly connected, GigabitEthernet0/1

192.168.12.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.12.0/24 is directly connected, GigabitEthernet0/2

L 192.168.12.1/32 is directly connected, GigabitEthernet0/2

S* 0.0.0.0/0 [1/0] via 192.168.12.2  (说明缺省路由配置成功)

Route 2: (跟R1大致一样)

Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#host

Router(config)#hostname R2

R2(config)#int g 0/0

R2(config-if)#ip add

R2(config-if)#ip address 192.168.2.254 255.255.255.0

R2(config-if)#no sh

R2(config-if)#no shutdown

R2(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

R2(config-if)#e

R2(config-if)#exit

R2(config)#int g 0/1

R2(config-if)#ip add

R2(config-if)#ip address 192.168.4.254 255.255.255.0

R2(config-if)#no sh

R2(config-if)#no shutdown

R2(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up

e

R2(config-if)#exit

R2(config)#int g 0/2

R2(config-if)#ip add

R2(config-if)#ip address 192.168.12.2 255.255.255.0

R2(config-if)#no s

R2(config-if)#no sh

R2(config-if)#no shutdown

R2(config-if)#

%LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to up

R2(config-if)#e

R2(config-if)#exit

R2(config)#ip rou

R2(config)#ip route 0.0.0.0 0.0.0.0 192.168.12.1

R2(config)#do show ip route

Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP

D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP

i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area

* - candidate default, U - per-user static route, o - ODR

P - periodic downloaded static route

Gateway of last resort is 192.168.12.1 to network 0.0.0.0

192.168.2.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.2.0/24 is directly connected, GigabitEthernet0/0

L 192.168.2.254/32 is directly connected, GigabitEthernet0/0

192.168.4.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.4.0/24 is directly connected, GigabitEthernet0/1

L 192.168.4.254/32 is directly connected, GigabitEthernet0/1

192.168.12.0/24 is variably subnetted, 2 subnets, 2 masks

C 192.168.12.0/24 is directly connected, GigabitEthernet0/2

L 192.168.12.2/32 is directly connected, GigabitEthernet0/2

S* 0.0.0.0/0 [1/0] via 192.168.12.1

结果：

所有网络可以互相Ping通

嘿嘿，这篇文章就到这结束啦，加油。 

标签：R1,R2,ip,GigabitEthernet0,缺省,192.168,config,日记,路由
来源： https://blog.csdn.net/weixin_54055099/article/details/121003287

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。

关于我们 | 联系我们 | 留言反馈

专注分享技术，共同学习，共同进步。侵权联系[81616952@qq.com]

Copyright (C)ICode9.com, All Rights Reserved.

ICode9版权所有