标签：二层 以太 PAgp range sec output SW2 config channel
拓扑:
配置需求：
将拓扑中的SW1和SW2的E1/0和E1/1这两个接口捆绑成一个链路。
配置步骤如下：
1、我们在SW1的e1/0-1配置PAgp
SW1(config)#interface range e1/0-1
SW1(config-if-range)#shutdown
SW1(config-if-range)#switchport trunk encapsulation dot1q
SW1(config-if-range)#switchport mode trunk
SW1(config-if-range)#channel-group 1 mode desirable
Creating a port-channel interface Port-channel 1
SW1(config-if-range)#no shutdown
2、我们在SW2的e1/0-1配置PAgp
SW2(config)#int range e1/0-2
SW2(config-if-range)#shutdown
SW2(config-if-range)#switchport trunk encapsulation dot1q
SW2(config-if-range)#switchport mode trunk
SW2(config-if-range)#channel-group 10 mode auto
Creating a port-channel interface Port-channel 10
SW2(config-if-range)#no shutdown
验证如下：
SW2(config)#do show etherchannel summary
Flags: D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
R - Layer3 S - Layer2
U - in use N - not in use, no aggregation
f - failed to allocate aggregator
M - not in use, minimum links not met
m - not in use, port not aggregated due to minimum links not met
u - unsuitable for bundling
w - waiting to be aggregated
d - default port
A - formed by Auto LAG
Number of channel-groups in use: 1
Number of aggregators: 1
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
10 Po10(SU) PAgP Et1/0(P) Et1/1(P) Et1/2(I)
两个接口被捆绑到以太通道组10（本地意义，两端可不相同），S代表是二层，U代表可用，P代表绑定成功。
验证如下：
SW2#show interfaces port-channel 10
Port-channel10 is up, line protocol is up (connected)
Hardware is EtherChannel, address is aabb.cc00.4011 (bia aabb.cc00.4011)
MTU 1500 bytes, BW 20000 Kbit/sec, DLY 1000 usec, //捆绑之后的带宽为20Mbps
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Auto-duplex, Auto-speed, media type is unknown
input flow-control is off, output flow-control is unsupported
Members in this channel: Et1/0 Et1/1
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:01, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 1000 bits/sec, 1 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
74 packets input, 6145 bytes, 0 no buffer
Received 66 broadcasts (0 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
82 packets output, 7828 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
标签：二层,以太,PAgp,range,sec,output,SW2,config,channel 来源： http://blog.51cto.com/12855977/2344632
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。