标签：中继 ip 192.168 dhcpd Linux sw1 dhcp sw2
配置dhcp服务器
在昨天的基础上通过yum安装dhcp服务
把dhcpd.conf.example内容覆盖进dhcpd.conf文件中
[root@localhost ~]# cp -p /usr/share/doc/dhcp*/dhcpd.conf.example /etc/dhcp/dhcpd.conf
cp：是否覆盖"/etc/dhcp/dhcpd.conf"？ y
进入配置文件dhcpd.conf在56行添加subnet，然后运行dhcpd服务
56 subnet 192.168.214.0 netmask 255.255.255.0 {
57 range 192.168.214.10 192.168.214.210;
58 option routers 192.168.214.214;
59 }
：wq
[root@localhost ~]# systemctl start dhcpd
可以发现windows获取了192.168.214.0网段的一个ip地址
dhcp服务器配置固定ip地址
查看windows网卡的mac地址
进入配置文件dhcpd.conf，修改78行至81行的内容，host后面跟主机名，名字任意起，hardware ethernet后面跟目标mac地址，fixed-address跟分配的固定ip地址，修改后重启dhcpd服务。
78 host shiki {
79 hardware ethernet 00:0C:29:EF:70:9A;
80 fixed-address 192.168.214.211;
81 }
[root@localhost ~]# systemctl restart dhcpd
释放原本的ip地址
再重新获取ip地址
配置dhcp中继
LSW1的配置
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys sw1
[sw1]undo info
[sw1]undo info-center en
Info: Information center is disabled.
[sw1]vlan batch 10 20 30 //添加vlan
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw1]inter e0/0/1
[sw1-Ethernet0/0/1]p l a //进入端口为每个接口设置接口模式access
[sw1-Ethernet0/0/1]p d v 10 //并设置vlan
[sw1-Ethernet0/0/1]
[sw1-Ethernet0/0/1]inter e0/0/2
[sw1-Ethernet0/0/2]p l a
[sw1-Ethernet0/0/2]p d v 20
[sw1-Ethernet0/0/2]inter e0/0/3
[sw1-Ethernet0/0/3]p l a
[sw1-Ethernet0/0/3]p d v 30
[sw1-Ethernet0/0/3]inter e0/0/4
[sw1-Ethernet0/0/4]p l t
[sw1-Ethernet0/0/4]p t a v a
[sw1-Ethernet0/0/4] User interface con0 is available
LSW2的配置
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]undo info
[Huawei]undo info-center en
Info: Information center is disabled.
[Huawei]sys sw2
[sw2]vlan batch 10 20 30
Info: This operation may take a few seconds. Please wait for a moment...done.
[sw2]inter g0/0/1
[sw2-GigabitEthernet0/0/1]p l t
[sw2-GigabitEthernet0/0/1]p t a v a
[sw2-GigabitEthernet0/0/1]inter vlan 10
[sw2-Vlanif10]ip address 192.168.10.1 24
[sw2-Vlanif10]ip address 192.168.20.1 24
[sw2-Vlanif10]ip address 192.168.10.1 24
[sw2-Vlanif10]inter vlan 20
[sw2-Vlanif20]ip address 192.168.20.1 24
[sw2-Vlanif20]inter vlan 30
[sw2-Vlanif30]ip address 192.168.214.1 24
[sw2-Vlanif30] User interface con0 is available
[sw2]dhcp enable //开启dhcp
Info: The operation may take a few seconds. Please wait for a moment.done.
[sw2]inter vlan 10
[sw2-Vlanif10]dhcp select relay //在接口处开启dhcp中继
[sw2-Vlanif10]inter vlan 20
[sw2-Vlanif20]dhcp select relay
[sw2-Vlanif20]inter vlan 30
[sw2-Vlanif30]dhcp select relay
[sw2-Vlanif30]dhcp relay server-ip 192.168.214.214 //给接口设置dhcp服务器的地址
[sw2-Vlanif30]inter vlan 20
[sw2-Vlanif20]dhcp relay server-ip 192.168.214.214
[sw2-Vlanif20]inter vlan 10
[sw2-Vlanif10]dhcp relay server-ip 192.168.214.214
在dhcp的配置文件/etc/dhcp/dhcpd.conf中添加下面的东西，subnet后跟要分配ip地址的pc的网段，range后跟ip地址池，option routers后跟指向的网关，最后再重启一下dhcpd服务
subnet 192.168.214.0 netmask 255.255.255.0 {
range 192.168.214.10 192.168.214.210;
option routers 192.168.214.214;
}
subnet 192.168.10.0 netmask 255.255.255.0 {
range 192.168.10.10 192.168.10.30;
option routers 192.168.10.1;
}
subnet 192.168.20.0 netmask 255.255.255.0 {
range 192.168.20.10 192.168.20.30;
option routers 192.168.20.1;
}
[root@localhost ~]# systemctl restart dhcpd
最后重新申请一下pc的ip地址发现pc获得了ip地址
标签：中继,ip,192.168,dhcpd,Linux,sw1,dhcp,sw2 来源： https://blog.csdn.net/Ryougi_Shiki_uio/article/details/117076130
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。