标签：jmeter ant linux apache save true saveservice

前言

继上篇Windows搭建 jmeter + ant +jenkins实现后，那么我们平时一般都是集成在linux服务器上。

所以这次我们来Linux下搭建 jmeter + ant +jenkins，废话不多说，走起！！！

一、环境准备

1、jdk1.8以上：

jdk安装教程详细参考(docker安装jenkins的小伙伴请忽略此步骤)：linux下安装jdk：https://www.cnblogs.com/gsxl/p/12128768.html

 或者yum安装：yum install java-1.8.0-openjdk.x86_64

2、jmeter：

所有版本：https://archive.apache.org/dist/jmeter/binaries/

本篇直接点击此链接下载：https://archive.apache.org/dist/jmeter/binaries/apache-jmeter-5.3.tgz  下载后上传至linux直接解压，或者wget下载

wget 下载：

wget https://archive.apache.org/dist/jmeter/binaries/apache-jmeter-5.3.tgz

注意Linux后缀为.zip，如：apache-jmeter-5.3.tgz 

解压：tar -xvf apache-jmeter-5.3.tgz

[root@iZbp19lugf22zbsubsf1y6Z jmeter-ant]# tar -xvf apache-jmeter-5.3.tgz 
apache-jmeter-5.3/
apache-jmeter-5.3/LICENSE
apache-jmeter-5.3/NOTICE

3、ant：

所有版本：https://downloads.apache.org/ant/binaries/

本篇直接点击此链接下载：https://downloads.apache.org/ant/binaries/apache-ant-1.9.15-bin.tar.gz   下载后直接解压：

注意Windows后缀为.zip，如：apache-ant-1.9.15-bin.tar.gz

设置环境变量：

①将bin、lib目录添加至环境变量中的系统变量path即可，如下图我的解压路径：

编辑，命令：vi /etc/profile

复制以下添加保存退出后，输入：source /etc/profile

# ANT_HOME
ANT_HOME=/root/jmeter-ant/apache-ant-1.9.15
export PATH=$PATH:$ANT_HOME/bin
export PATH=$PATH:$ANT_HOME/lib

输入命令验证版本：ant -version

 

二、jmeter、ant各种配置

1、jmeter配置：

①将jmeter目录bin\jmeter.properties的490行-528行改为如下：

注意：是jmeter.properties文件，在490-528行中，凡是有jmeter开头的且有#号都需要去掉，或者直接复制下面替换490-528行；

jmeter.save.saveservice.output_format=xml

# The below properties are true when field should be saved; false otherwise
#
# assertion_results_failure_message only affects CSV output
jmeter.save.saveservice.assertion_results_failure_message=true
#
# legitimate values: none, first, all
jmeter.save.saveservice.assertion_results=true
#
jmeter.save.saveservice.data_type=true
jmeter.save.saveservice.label=true
jmeter.save.saveservice.response_code=true
# response_data is not currently supported for CSV output
jmeter.save.saveservice.response_data=true
# Save ResponseData for failed samples
jmeter.save.saveservice.response_data.on_error=true
jmeter.save.saveservice.response_message=true
jmeter.save.saveservice.successful=true
jmeter.save.saveservice.thread_name=true
jmeter.save.saveservice.time=true
jmeter.save.saveservice.subresults=true
jmeter.save.saveservice.assertions=true
jmeter.save.saveservice.latency=true
# Only available with HttpClient4
jmeter.save.saveservice.connect_time=true
jmeter.save.saveservice.samplerData=true
jmeter.save.saveservice.responseHeaders=true
jmeter.save.saveservice.requestHeaders=true
jmeter.save.saveservice.encoding=true
jmeter.save.saveservice.bytes=true
# Only available with HttpClient4
jmeter.save.saveservice.sent_bytes=true
jmeter.save.saveservice.url=true
jmeter.save.saveservice.filename=true
jmeter.save.saveservice.hostname=true
jmeter.save.saveservice.thread_counts=true
jmeter.save.saveservice.sample_count=true
jmeter.save.saveservice.idle_time=true

更改完成后，我是ftp上传(或者vi编辑)：

2、ant 配置

 ①将apache-jmeter-5.3\extras目录下的：ant-jmeter-1.1.1.jar 复制到apache-ant-1.9.15\lib\

命令：cp 文件路径 复制到哪文件路径

[root@iZbp19lugf22zbsubsf1y6Z apache-jmeter-5.3]# cp extras/ant-jmeter-1.1.1.jar ../apache-ant-1.9.15/lib/ant-jmeter-1.1.1.jar
[root@iZbp19lugf22zbsubsf1y6Z apache-jmeter-5.3]# 

②创建以下目录文件(网盘下载的不需要再新建了)：

推荐直接网盘下载完整文件夹，链接：https://pan.baidu.com/s/1dKy6GpHFDMBIYK0qQixdiA    提取码：gsxl

 ③编辑build.xml：(vi编辑或者在自己Windows电脑编辑好再上传)

将你的（1）-（5）都改为自己的路径，保存：

 三、运行ant run

1、在目录下运行：ant

[root@iZbp19lugf22zbsubsf1y6Z standard-catalog]# ant
Buildfile: /root/jmeter-ant/standard-catalog/build.xml
  [taskdef] Could not load definitions from resource net/sf/antcontrib/antlib.xml. It could not be found.

run:
  [taskdef] Could not load definitions from resource net/sf/antcontrib/antlib.xml. It could not be found.

test:
   [jmeter] Executing test plan: /root/jmeter-ant/standard-catalog/xxx-business.jmx ==> /root/jmeter-ant/standard-catalog/jtl/InterfaceReport202009181126.jtl
   [jmeter] Creating summariser <summary>
   [jmeter] Created the tree successfully using /root/jmeter-ant/standard-catalog/xxx-business.jmx
   [jmeter] Starting standalone test @ Fri Sep 18 23:26:06 CST 2020 (1600442766325)
   [jmeter] Waiting for possible Shutdown/StopTestNow/HeapDump/ThreadDump message on port 4445
   [jmeter] summary =      9 in 00:00:01 =    7.4/s Avg:    92 Min:    12 Max:   659 Err:     0 (0.00%)
   [jmeter] Tidying up ...    @ Fri Sep 18 23:26:08 CST 2020 (1600442768253)
   [jmeter] ... end of run
   [jmeter] Executing test plan: /root/jmeter-ant/standard-catalog/xxx-shopping.jmx ==> /root/jmeter-ant/standard-catalog/jtl/InterfaceReport202009181126.jtl
   [jmeter] Creating summariser <summary>
   [jmeter] Created the tree successfully using /root/jmeter-ant/standard-catalog/xxx-shopping.jmx
   [jmeter] Starting standalone test @ Fri Sep 18 23:26:10 CST 2020 (1600442770591)
   [jmeter] Waiting for possible Shutdown/StopTestNow/HeapDump/ThreadDump message on port 4445
   [jmeter] summary =      6 in 00:00:01 =    4.3/s Avg:   175 Min:    19 Max:   784 Err:     0 (0.00%)
   [jmeter] Tidying up ...    @ Fri Sep 18 23:26:12 CST 2020 (1600442772678)
   [jmeter] ... end of run
  [taskdef] Could not load definitions from resource net/sf/antcontrib/antlib.xml. It could not be found.

report:
     [xslt] Processing /root/jmeter-ant/standard-catalog/jtl/InterfaceReport202009181126.jtl to /root/jmeter-ant/standard-catalog/html/InterfaceReport.html
     [xslt] Loading stylesheet /root/jmeter-ant/standard-catalog/xsl/jmeter.results.shanhe.me.xsl
     [copy] Copying 2 files to /root/jmeter-ant/standard-catalog/html

BUILD SUCCESSFUL
Total time: 10 seconds

 2、html目录下：查看报告

 利用：anywhere生成外网可访问

anywhere安装请参考：https://www.cnblogs.com/gsxl/p/13193939.html  第二大点，标题：二、 node.js +Anywhere + html

[root@iZbp19lugf22zbsubsf1y6Z standard-catalog]# cd html/
[root@iZbp19lugf22zbsubsf1y6Z html]# anywhere -p 8055
Running at http://xxx.16.xx.2xx:8055/
Also running at https://xxx.16.1xx.2xx:8056/

 欢迎来大家QQ交流群一起学习：482713805

标签：jmeter,ant,linux,apache,save,true,saveservice
来源： https://www.cnblogs.com/gsxl/p/13660988.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。