ICode9

精准搜索请尝试: 精确搜索
首页 > 系统相关> 文章详细

ubuntu后台运行终端

2020-03-16 09:58:42  阅读:200  来源: 互联网

标签:00 pvcent107 screen 进程 终端 ubuntu 后台 root nohup


Linux 技巧:让进程在后台运行更可靠的几种方法

https://www.ibm.com/developerworks/cn/linux/l-cn-nohup/      

我们经常会碰到这样的问题,用 telnet/ssh 登录了远程的 Linux 服务器,运行了一些耗时较长的任务, 结果却由于网络的不稳定导致任务中途失败。如何让命令提交后不受本地关闭终端窗口/网络断开连接的干扰呢?下面举了一些例子, 您可以针对不同的场景选择不同的方式来处理这个问题。

nohup/setsid/&

场景:

如果只是临时有一个命令需要长时间运行,什么方法能最简便的保证它在后台稳定运行呢?

hangup 名称的来由

在 Unix 的早期版本中,每个终端都会通过 modem 和系统通讯。当用户 logout 时,modem 就会挂断(hang up)电话。 同理,当 modem 断开连接时,就会给终端发送 hangup 信号来通知其关闭所有子进程。

解决方法:

我们知道,当用户注销(logout)或者网络断开时,终端会收到 HUP(hangup)信号从而关闭其所有子进程。因此,我们的解决办法就有两种途径:要么让进程忽略 HUP 信号,要么让进程运行在新的会话里从而成为不属于此终端的子进程。

1. nohup

nohup 无疑是我们首先想到的办法。顾名思义,nohup 的用途就是让提交的命令忽略 hangup 信号。让我们先来看一下 nohup 的帮助信息:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 NOHUP(1)                        User Commands                        NOHUP(1)   NAME        nohup - run a command immune to hangups, with output to a non-tty   SYNOPSIS        nohup COMMAND [ARG]...        nohup OPTION   DESCRIPTION        Run COMMAND, ignoring hangup signals.          --help display this help and exit          --version               output version information and exit

可见,nohup 的使用是十分方便的,只需在要处理的命令前加上 nohup 即可,标准输出和标准错误缺省会被重定向到 nohup.out 文件中。一般我们可在结尾加上"&"来将命令同时放入后台运行,也可用">filename 2>&1"来更改缺省的重定向文件名。

nohup 示例
1 2 3 4 5 6 7 [root@pvcent107 ~]# nohup ping www.ibm.com & [1] 3059 nohup: appending output to `nohup.out' [root@pvcent107 ~]# ps -ef |grep 3059 root      3059   984  0 21:06 pts/3    00:00:00 ping www.ibm.com root      3067   984  0 21:06 pts/3    00:00:00 grep 3059 [root@pvcent107 ~]#

2。setsid

nohup 无疑能通过忽略 HUP 信号来使我们的进程避免中途被中断,但如果我们换个角度思考,如果我们的进程不属于接受 HUP 信号的终端的子进程,那么自然也就不会受到 HUP 信号的影响了。setsid 就能帮助我们做到这一点。让我们先来看一下 setsid 的帮助信息:

1 2 3 4 5 6 7 8 9 10 SETSID(8)                 Linux Programmer’s Manual                 SETSID(8)   NAME        setsid - run a program in a new session   SYNOPSIS        setsid program [ arg ... ]   DESCRIPTION        setsid runs a program in a new session.

可见 setsid 的使用也是非常方便的,也只需在要处理的命令前加上 setsid 即可。

setsid 示例
1 2 3 4 5 [root@pvcent107 ~]# setsid ping www.ibm.com [root@pvcent107 ~]# ps -ef |grep www.ibm.com root     31094     1  0 07:28 ?        00:00:00 ping www.ibm.com root     31102 29217  0 07:29 pts/4    00:00:00 grep www.ibm.com [root@pvcent107 ~]#

值得注意的是,上例中我们的进程 ID(PID)为31094,而它的父 ID(PPID)为1(即为 init 进程 ID),并不是当前终端的进程 ID。请将此例与nohup 例中的父 ID 做比较。

3。&

这里还有一个关于 subshell 的小技巧。我们知道,将一个或多个命名包含在“()”中就能让这些命令在子 shell 中运行中,从而扩展出很多有趣的功能,我们现在要讨论的就是其中之一。

当我们将"&"也放入“()”内之后,我们就会发现所提交的作业并不在作业列表中,也就是说,是无法通过jobs来查看的。让我们来看看为什么这样就能躲过 HUP 信号的影响吧。

subshell 示例
1 2 3 4 5 [root@pvcent107 ~]# (ping www.ibm.com &) [root@pvcent107 ~]# ps -ef |grep www.ibm.com root     16270     1  0 14:13 pts/4    00:00:00 ping www.ibm.com root     16278 15362  0 14:13 pts/4    00:00:00 grep www.ibm.com [root@pvcent107 ~]#

从上例中可以看出,新提交的进程的父 ID(PPID)为1(init 进程的 PID),并不是当前终端的进程 ID。因此并不属于当前终端的子进程,从而也就不会受到当前终端的 HUP 信号的影响了。

disown

场景:

我们已经知道,如果事先在命令前加上 nohup 或者 setsid 就可以避免 HUP 信号的影响。但是如果我们未加任何处理就已经提交了命令,该如何补救才能让它避免 HUP 信号的影响呢?

解决方法:

这时想加 nohup 或者 setsid 已经为时已晚,只能通过作业调度和 disown 来解决这个问题了。让我们来看一下 disown 的帮助信息:

1 2 3 4 5 6 7 8 9 10 11 disown [-ar] [-h] [jobspec ...]     Without options, each jobspec is  removed  from  the  table  of     active  jobs.   If  the -h option is given, each jobspec is not     removed from the table, but is marked so  that  SIGHUP  is  not     sent  to the job if the shell receives a SIGHUP.  If no jobspec     is present, and neither the -a nor the -r option  is  supplied,     the  current  job  is  used.  If no jobspec is supplied, the -a     option means to remove or mark all jobs; the -r option  without     a  jobspec  argument  restricts operation to running jobs.  The     return value is 0 unless a jobspec does  not  specify  a  valid     job.

可以看出,我们可以用如下方式来达成我们的目的。

灵活运用 CTRL-z

在我们的日常工作中,我们可以用 CTRL-z 来将当前进程挂起到后台暂停运行,执行一些别的操作,然后再用 fg 来将挂起的进程重新放回前台(也可用 bg 来将挂起的进程放在后台)继续运行。这样我们就可以在一个终端内灵活切换运行多个任务,这一点在调试代码时尤为有用。因为将代码编辑器挂起到后台再重新放回时,光标定位仍然停留在上次挂起时的位置,避免了重新定位的麻烦。

  • disown -h jobspec来使某个作业忽略HUP信号。
  • disown -ah 来使所有的作业都忽略HUP信号。
  • disown -rh 来使正在运行的作业忽略HUP信号。

需要注意的是,当使用过 disown 之后,会将把目标作业从作业列表中移除,我们将不能再使用jobs来查看它,但是依然能够用ps -ef查找到它。

但是还有一个问题,这种方法的操作对象是作业,如果我们在运行命令时在结尾加了"&"来使它成为一个作业并在后台运行,那么就万事大吉了,我们可以通过jobs命令来得到所有作业的列表。但是如果并没有把当前命令作为作业来运行,如何才能得到它的作业号呢?答案就是用 CTRL-z(按住Ctrl键的同时按住z键)了!

CTRL-z 的用途就是将当前进程挂起(Suspend),然后我们就可以用jobs命令来查询它的作业号,再用bg jobspec来将它放入后台并继续运行。需要注意的是,如果挂起会影响当前进程的运行结果,请慎用此方法。

disown 示例1(如果提交命令时已经用“&”将命令放入后台运行,则可以直接使用“disown”)
1 2 3 4 5 6 7 8 9 [root@pvcent107 build]# cp -r testLargeFile largeFile & [1] 4825 [root@pvcent107 build]# jobs [1]+  Running                 cp -i -r testLargeFile largeFile & [root@pvcent107 build]# disown -h %1 [root@pvcent107 build]# ps -ef |grep largeFile root      4825   968  1 09:46 pts/4    00:00:00 cp -i -r testLargeFile largeFile root      4853   968  0 09:46 pts/4    00:00:00 grep largeFile [root@pvcent107 build]# logout
disown 示例2(如果提交命令时未使用“&”将命令放入后台运行,可使用 CTRL-z 和“bg”将其放入后台,再使用“disown”)
1 2 3 4 5 6 7 8 9 10 11 12 [root@pvcent107 build]# cp -r testLargeFile largeFile2   [1]+  Stopped                 cp -i -r testLargeFile largeFile2 [root@pvcent107 build]# bg %1 [1]+ cp -i -r testLargeFile largeFile2 & [root@pvcent107 build]# jobs [1]+  Running                 cp -i -r testLargeFile largeFile2 & [root@pvcent107 build]# disown -h %1 [root@pvcent107 build]# ps -ef |grep largeFile2 root      5790  5577  1 10:04 pts/3    00:00:00 cp -i -r testLargeFile largeFile2 root      5824  5577  0 10:05 pts/3    00:00:00 grep largeFile2 [root@pvcent107 build]#

screen

场景:

我们已经知道了如何让进程免受 HUP 信号的影响,但是如果有大量这种命令需要在稳定的后台里运行,如何避免对每条命令都做这样的操作呢?

解决方法:

此时最方便的方法就是 screen 了。简单的说,screen 提供了 ANSI/VT100 的终端模拟器,使它能够在一个真实终端下运行多个全屏的伪终端。screen 的参数很多,具有很强大的功能,我们在此仅介绍其常用功能以及简要分析一下为什么使用 screen 能够避免 HUP 信号的影响。我们先看一下 screen 的帮助信息:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 SCREEN(1)                                                           SCREEN(1)   NAME        screen - screen manager with VT100/ANSI terminal emulation   SYNOPSIS        screen [ -options ] [ cmd [ args ] ]        screen -r [[pid.]tty[.host]]        screen -r sessionowner/[[pid.]tty[.host]]   DESCRIPTION        Screen  is  a  full-screen  window manager that multiplexes a physical        terminal between several  processes  (typically  interactive  shells).        Each  virtual  terminal provides the functions of a DEC VT100 terminal        and, in addition, several control functions from the  ISO  6429  (ECMA        48,  ANSI  X3.64)  and ISO 2022 standards (e.g. insert/delete line and        support for multiple character sets).  There is a  scrollback  history        buffer  for  each virtual terminal and a copy-and-paste mechanism that        allows moving text regions between windows.

使用 screen 很方便,有以下几个常用选项:

  • screen -dmS session name来建立一个处于断开模式下的会话(并指定其会话名)。
  • screen -list 来列出所有会话。
  • screen -r session name来重新连接指定会话。
  • 用快捷键CTRL-a d 来暂时断开当前会话。
screen 示例
1 2 3 4 5 6 7 [root@pvcent107 ~]# screen -dmS Urumchi [root@pvcent107 ~]# screen -list There is a screen on:         12842.Urumchi   (Detached) 1 Socket in /tmp/screens/S-root.   [root@pvcent107 ~]# screen -r Urumchi

当我们用“-r”连接到 screen 会话后,我们就可以在这个伪终端里面为所欲为,再也不用担心 HUP 信号会对我们的进程造成影响,也不用给每个命令前都加上“nohup”或者“setsid”了。这是为什么呢?让我来看一下下面两个例子吧。

1. 未使用 screen 时新进程的进程树
1 2 3 4 5 6 7 8 9 [root@pvcent107 ~]# ping www.google.com & [1] 9499 [root@pvcent107 ~]# pstree -H 9499 init─┬─Xvnc      ├─acpid      ├─atd      ├─2*[sendmail]      ├─sshd─┬─sshd───bash───pstree      │       └─sshd───bash───ping

我们可以看出,未使用 screen 时我们所处的 bash 是 sshd 的子进程,当 ssh 断开连接时,HUP 信号自然会影响到它下面的所有子进程(包括我们新建立的 ping 进程)。

2. 使用了 screen 后新进程的进程树
1 2 3 4 5 6 7 8 9 [root@pvcent107 ~]# screen -r Urumchi [root@pvcent107 ~]# ping www.ibm.com & [1] 9488 [root@pvcent107 ~]# pstree -H 9488 init─┬─Xvnc      ├─acpid      ├─atd      ├─screen───bash───ping      ├─2*[sendmail]

而使用了 screen 后就不同了,此时 bash 是 screen 的子进程,而 screen 是 init(PID为1)的子进程。那么当 ssh 断开连接时,HUP 信号自然不会影响到 screen 下面的子进程了。

总结

现在几种方法已经介绍完毕,我们可以根据不同的场景来选择不同的方案。nohup/setsid 无疑是临时需要时最方便的方法,disown 能帮助我们来事后补救当前已经在运行了的作业,而 screen 则是在大批量操作时不二的选择了。

 

标签:00,pvcent107,screen,进程,终端,ubuntu,后台,root,nohup
来源: https://www.cnblogs.com/xyyhcn/p/12501959.html

本站声明: 1. iCode9 技术分享网(下文简称本站)提供的所有内容,仅供技术学习、探讨和分享;
2. 关于本站的所有留言、评论、转载及引用,纯属内容发起人的个人观点,与本站观点和立场无关;
3. 关于本站的所有言论和文字,纯属内容发起人的个人观点,与本站观点和立场无关;
4. 本站文章均是网友提供,不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属;如您发现该文章侵犯了您的权益,可联系我们第一时间进行删除;
5. 本站为非盈利性的个人网站,所有内容不会用来进行牟利,也不会利用任何形式的广告来间接获益,纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。

专注分享技术,共同学习,共同进步。侵权联系[81616952@qq.com]

Copyright (C)ICode9.com, All Rights Reserved.

ICode9版权所有