我无法为IPv6 / ICMPv6数据包设置“do not fragment”标志.我正在做PMTUD,我想强制路由器丢弃比MTU更大的数据包.使用setsockopt和IPV6_MTU_DISCOVER不起作用.
int on = IPV6_PMTUDISC_DO; // tried also IPV6_PMTUDISC_PROBE
setsockopt(socket, IPPROTO_IPV6, IPV6_MTU_DISCOVER, &on, sizeof(on));
结果：
我也不能像在Unix-Linux Addison-Wesley-Stevens2003-Unix网络编程中所描述的那样使用带有IPV6_DONTFRAG的setosckopt,因为我包含了netinet / in6.h头文件,并且在linux / in6.h中定义了IPV6_DONTFRAG.在我的源代码中包含linux / in6.h会导致这些重定义错误.
In file included from mypmtud.cc:30:0: /usr/include/linux/in6.h:30:8: error: redefinition of ‘struct in6_addr’ In file included from /usr/include/netdb.h:28:0,
from mypmtud.cc:23: /usr/include/netinet/in.h:198:8: error: previous definition of ‘struct in6_addr’ In file included from mypmtud.cc:30:0: /usr/include/linux/in6.h:46:8: error: redefinition of ‘struct sockaddr_in6’ In file included from /usr/include/netdb.h:28:0,
from mypmtud.cc:23: /usr/include/netinet/in.h:239:8: error: previous definition of ‘struct sockaddr_in6’ In file included from mypmtud.cc:30:0: /usr/include/linux/in6.h:54:8: error: redefinition of ‘struct ipv6_mreq’ In file included from /usr/include/netdb.h:28:0,
from mypmtud.cc:23: /usr/include/netinet/in.h:275:8: error: previous definition of ‘struct ipv6_mreq’ make: *** [mypmtud] Error 1
环境：VirtualBox 4.26上的Ubuntu 12.10和虚拟网络的GNS3.虚拟Cisco C3660路由器只有基本配置：ip,ipv6地址,无关闭和设置mtu.
编辑：
我需要IPv6堆栈/操作系统内核丢弃大于链路MTU的数据包或发出“此数据包需要分段”的信号.我怎样才能实现这种行为？
我尝试了使用IPV6_DONTFRAG的setsockopt(在我的代码#define IPV6_DONTFRAG 62中定义),setsockopt与IPV6_MTU_DISCOVER,int on = IPV6_PMTUDISC_DO和setsockopt与IPV6_RECVPATHMTU.
但我没有得到包含大量回复或辅助数据与cmsg_level == IPPROTO_IPV6和cmsg_type == IPV6_PATHMTU.
我的部分代码：
/** sending ICMP packet*/
if (((length = sendto(mysocket, packet, lengthBuff, 0, result->ai_addr, result->ai_addrlen)) < 0) && (errno == EMSGSIZE)){
// works for IPv4, doesn't work with IPv6
cout << "changing maxBuff and lengthBuff size" << endl;
maxBuff = lengthBuff;
lengthBuff = (minBuff + maxBuff) / 2;
if (packet) {
delete(packet);
packet = NULL;
}
} else if (length < 0){
cerr << "Error: sending data." << endl;
freeaddrinfo(result);
close(mysocket);
if (packet) {
delete(packet);
packet = NULL;
}
exit(1);
} else if(((recvmsg(mysocket, &msg, 0)) != -1) && (errno != EINTR)) {
// reading ancillary dada as described in *Unix-Linux Addison-Wesley - Stevens2003 - Unix Network Programming, page 736*
cmsgh = CMSG_FIRSTHDR(&msg);
if(cmsgh != NULL) {
cout << "getting msg " << endl;
cout << "msg len " << msg.msg_controllen << endl;
if(cmsgh->cmsg_level == IPPROTO_ICMPV6 && cmsgh->cmsg_type == IPV6_PATHMTU)
{
cout << "CMSGHEADER - GOOD" << endl;
//mtustruct = CMSG_DATA(&msg);
maxBuff = lengthBuff;
lengthBuff = (minBuff + maxBuff) / 2;
if (packet) {
delete(packet);
packet = NULL;
}
}
else{
cout << "different ancillary data. " << endl;
cout << " level " << cmsgh->cmsg_level << " type " << cmsgh->cmsg_type << endl;
}
}
} else {
cout << "no ERROR with sendto and no RESCVMSG" << endl;
}
/** receiving ICMP data */
tv.tv_sec = 3;
tv.tv_usec = 0;
int retval; // select
FD_ZERO(&mySet);
FD_SET(mysocket, &mySet);
retval = select(mysocket + 1, &mySet, NULL, NULL, &tv);
if (retval == -1) {
cerr << "select failed" << endl;
//break;
exit(1);
} else if (retval) {
if ((length = recvfrom(mysocket, buffer, MAX, 0, result->ai_addr, &(result->ai_addrlen))) == -1) {
cerr << "Error: receiving data." << endl;
} else {
icmpRec = (struct icmp6_hdr*) buffer;
if((icmpRec->icmp6_type == ICMP6_PACKET_TOO_BIG)) {
cout << "next hop MTU: " << ntohl(icmpRec->icmp6_mtu) << endl;
maxBuff = ntohl(icmpRec->icmp6_mtu);
} else if ((icmpRec->icmp6_type == ICMP6_ECHO_REPLY) && (ntohs(icmpRec->icmp6_id) == pid) && (ntohs(icmpRec->icmp6_seq) == (seq - 1))) {
cout << "code " << ntohs(icmpRec->icmp6_code) << endl;
cout << "ICMP ECHO REPLY" << endl;
minBuff = lengthBuff;
}
}
}
EDIT2：
我意识到,使用已定义的IPV6_DONTFRAG的setsockopt对我来说不起作用,但是带有IPV6_MTU_DISCOVER的setsockopt正在为自己的接口工作. eth1接口MTU为1500(默认),如果sendto想要发送更大的数据包,则errno设置为EMSGSIZE.也有一段时间后,我得到PACKET TOO BIG消息,因为这些消息不是从自己的内核/操作系统发送消息.
我真正的问题是,我没有得到(Ubuntu 12.10在VirtualBox 4.2.6上运行)来自在GNS3上运行的虚拟路由器(Cisco c3660)的PACKET TOO BIG消息.
解决方法:
and I want to force the router to drop packets bigger then the MTU
在IPv6中,总是会丢弃大于MTU的数据包.与IPv4不同,IPv6路由器不会对数据包进行分段.相反,源预计将执行PMTU和：
>让传输层协议生成足够大小的数据报
>在本地分段数据包并附加片段扩展名
Linux确实完全支持IPV6_DONTFRAG(我认为它是在2.6.35中添加的),尽管它只影响本地行为.
标签：c,icmp,ipv6 来源： https://codeday.me/bug/20190901/1782806.html
本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享； 2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关； 3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关； 4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除； 5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。