首页 > 系统相关> 文章详细

HC32L110(五) Ubuntu20.04 VSCode的Debug环境配置

2022-09-03 22:32:27 阅读：278 来源： 互联网

标签：Ubuntu20.04 none x86 VSCode gcc HC32L110 64 eabi arm

环境说明

本文使用的软硬件环境已经在前面介绍

硬件

基于 HC32L110 系列MCU的开发板
JLink OB

软件

Ubuntu20.04
VSCode

配置步骤

安装配置 Cortex-Debug

在VSCode的插件中, 搜索安装Cortex-Debug

在VSCode中, 切换到Run And Debug, 点击上方的 Add Configuration, 会在 .vscode 目录下的 launch.json (如果没有会自动创建)中添加配置, 需要增加对应的配置信息

"configurations": [
        {
            "name": "Cortex Debug",
            "cwd": "${workspaceFolder}",
            "executable": "${workspaceFolder}/Build/app.elf",
            "request": "launch",        // 可以是launch或attach, 后者表示运行中接入, 前者会执行前置任务并重启
            "type": "cortex-debug",
            "runToEntryPoint": "main",
            "servertype": "jlink",
            "device": "HC32L110X4",     // 如果是32K的版本, 需要修改为 HC32L110X6
            "interface": "swd",
            "runToMain": true,          // false则从 reset handler 开始停留
            "preLaunchTask": "build",   // 根据 tasks.json 中配置的任务填写, 
            // "preLaunchCommands": ["Build all"], // 如果不使用 preLaunchTask, 可以用这个参数指定命令行命令
            "svdFile": "",              // svd 用于观察外设
            "showDevDebugOutput": "vscode", // 输出的日志级别, parsed:解析后的内容, raw:直接输出, vscode:包含scode调用和raw
            "swoConfig":
            {
                "enabled": true,
                "cpuFrequency": 24000000,
                "swoFrequency":  4000000,
                "source": "probe",
                "decoders":
                [
                    {
                        "label": "ITM port 0 output",
                        "type": "console",
                        "port": 0,
                        "showOnStartup": true,
                        "encoding": "ascii"
                    }
                ]
            }
        }
    ]

具体的配置项含义, 可以参考 Debug Attributes

同时在 .vscode/settings.json 中增加以下配置, 如果文件不存在则创建. 路径根据自己的环境修改

{
    "cortex-debug.gdbPath": "/opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gdb",
    "cortex-debug.JLinkGDBServerPath": "/opt/SEGGER/JLink/JLinkGDBServerCLExe",
}

修改 rules.mk

在rules.mk中开启debug, 涉及到两处, OPT要使用-O0, 表示不执行任何优化. 使用优化后代码中的部分变量在编译后会被丢弃无法跟踪

OPT         ?= -O0

在CFLAGS中增加gdb输出

CFLAGS      += -g -gdwarf-2 # original: -g

这样编译后, 尺寸会比原先大不少

Ubuntu20.04下遇到的问题

以上配置后, 点击 Run And Debug 中的绿色运行图标应该就能启动Debug, 但是可能在看到以下输出后就没有反应了

Reading symbols from /opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-objdump --syms -C -h -w /home/milton/Stm32Projects/hc32_workspace/hc32l110-template/Build/app.elf
Reading symbols from /opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-nm --defined-only -S -l -C -p /home/milton/Stm32Projects/hc32_workspace/hc32l110-template/Build/app.elf
Launching GDB: /opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gdb -q --interpreter=mi2
1-gdb-version

这时候到命令行执行一下命令/opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gdb -q --interpreter=mi2就能看到问题

1. libncursesw.so.5: cannot open shared object file

首先是会有这样的错误输出

/opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gdb -q --interpreter=mi2
/opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gdb: error while loading shared libraries: libncursesw.so.5: cannot open shared object file: No such file or directory

观察ldd可以看到缺少两个so: libncursesw.so.5, libpython3.6m.so.1.0

ldd /opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gdb
    linux-vdso.so.1 (0x00007ffc82998000)
    libncursesw.so.5 => not found
    libtinfo.so.5 => /lib/x86_64-linux-gnu/libtinfo.so.5 (0x00007f326ba1e000)
    libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f326ba18000)
    libpython3.6m.so.1.0 => not found
    libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f326b9f5000)
    libutil.so.1 => /lib/x86_64-linux-gnu/libutil.so.1 (0x00007f326b9f0000)
    libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007f326b89f000)
    libexpat.so.1 => /lib/x86_64-linux-gnu/libexpat.so.1 (0x00007f326b871000)
    libstdc++.so.6 => /lib/x86_64-linux-gnu/libstdc++.so.6 (0x00007f326b68f000)
    libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00007f326b674000)
    libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f326b482000)
    /lib64/ld-linux-x86-64.so.2 (0x00007f326ba6e000)

libncursesw.so.5可以通过安装 libncursesw5 可以解决

sudo apt install libncursesw5

2. libpython3.6m.so.1.0: cannot open shared object file

这样就剩下另一个动态连接库无法找到

/opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gdb -q --interpreter=mi2
/opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gdb: error while loading shared libraries: libpython3.6m.so.1.0: cannot open shared object file: No such file or directory

但是 Ubuntu20.04 自带的 Python3.8, 无法安装 Python3.6

~$ sudo apt-get install libpython3.6
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Note, selecting 'libpython3.6-stdlib' for regex 'libpython3.6'
0 upgraded, 0 newly installed, 0 to remove and 29 not upgraded.

简单粗暴的解决方法就是直接用3.8的代替

cd /usr/lib/x86_64-linux-gnu/
$ ll libpython*
lrwxrwxrwx 1 root root      19 Jul  1 20:27 libpython2.7.so.1 -> libpython2.7.so.1.0
-rw-r--r-- 1 root root 3455600 Jul  1 20:27 libpython2.7.so.1.0
lrwxrwxrwx 1 root root      55 Jun 23 04:18 libpython3.8.a -> ../python3.8/config-3.8-x86_64-linux-gnu/libpython3.8.a
lrwxrwxrwx 1 root root      17 Jun 23 04:18 libpython3.8.so -> libpython3.8.so.1
lrwxrwxrwx 1 root root      19 Jun 23 04:18 libpython3.8.so.1 -> libpython3.8.so.1.0
-rw-r--r-- 1 root root 5449112 Jun 23 04:18 libpython3.8.so.1.0
$ sudo ln -s libpython3.8.so.1.0 libpython3.6m.so.1.0

这时候再运行就可以启动了

$ /opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gdb -q --interpreter=mi2
/opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gdb: Symbol `PyBool_Type' has different size in shared object, consider re-linking
/opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gdb: Symbol `PySlice_Type' has different size in shared object, consider re-linking
/opt/gcc-arm/gcc-arm-11.2-2022.02-x86_64-arm-none-eabi/bin/arm-none-eabi-gdb: Symbol `PyFloat_Type' has different size in shared object, consider re-linking
=thread-group-added,id="i1"
(gdb)

使用

点击 Run And Debug 中的绿色运行图标启动Debug, F10 下一步, F11 进入, Shift + F11 跳出. 左侧能观察到变量值和寄存器值. 操作方法和其它IDE基本一致.

参考

Cortex-Debug Wiki https://github.com/Marus/cortex-debug/wiki
Matej Blagšič: Debugging STM32 in VSCODE with stlink and jlink https://www.youtube.com/watch?v=g2Kf6RbdrIs
- GitHub Project https://github.com/prtzl/Embedded_videos/tree/master/045_BUILDING-PT4/test-f407vg
Cortex-Debug 参数说明 https://github.com/Marus/cortex-debug/blob/master/debug_attributes.md
https://stackoverflow.com/questions/64491112/libncursesw-so-5-is-installed-but-a-program-that-needs-it-says-no-such-file-or
libpython3.6m.so.1.0: cannot open shared object file: No such file or directory https://github.com/JacquesLucke/animation_nodes/issues/906
How to install libpython3.6m.so.1.0 on ubuntu 20.04 https://askubuntu.com/questions/1404248/how-to-install-libpython3-6m-so-1-0-on-ubuntu-20-04

标签：Ubuntu20.04,none,x86,VSCode,gcc,HC32L110,64,eabi,arm
来源： https://www.cnblogs.com/milton/p/16653827.html

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。

ICode9