标签：__ kernel 调用 init command 2021 Linux arm

通过对U-boot的启动流程的梳理，最终我们进入了Linux的内核，下面分析一下Linux内核的启动流程和如何做一个简单的移植。

一、kernel启动流程

通过arch/arm/kernel/vmlinux.lds脚本链接文件查看Linux kernel内核入口时stext，然后我们通过搜索得知，stext定义在arch/arm/kernel/head.S中，函数代码如下：

ENTRY(stext)
 ARM_BE8(setend	be )			@ ensure we are in BE8 mode

 THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
 THUMB(	bx	r9		)			@ If this is a Thumb-2 kernel,
 THUMB(	.thumb			)		@ switch to Thumb now.
 THUMB(1:			)

#ifdef CONFIG_ARM_VIRT_EXT
	bl	__hyp_stub_install
#endif
	@ ensure svc mode and all interrupts masked
	safe_svcmode_maskall r9

	mrc	p15, 0, r9, c0, c0			@ get processor id
	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
	movs	r10, r5					@ invalid processor (r5=0)?
 THUMB( it	eq )					@ force fixup-able long branch encoding
	beq	__error_p					@ yes, error 'p'

#ifdef CONFIG_ARM_LPAE
	mrc	p15, 0, r3, c0, c1, 4		@ read ID_MMFR0
	and	r3, r3, #0xf				@ extract VMSA support
	cmp	r3, #5						@ long-descriptor translation table format?
 THUMB( it	lo )					@ force fixup-able long branch encoding
	blo	__error_lpae				@ only classic page table format
#endif

#ifndef CONFIG_XIP_KERNEL
	adr	r3, 2f
	ldmia	r3, {r4, r8}
	sub	r4, r3, r4			@ (PHYS_OFFSET - PAGE_OFFSET)
	add	r8, r8, r4			@ PHYS_OFFSET
#else
	ldr	r8, =PLAT_PHYS_OFFSET		@ always constant in this case
#endif

	/*
	 * r1 = machine no, r2 = atags or dtb,
	 * r8 = phys_offset, r9 = cpuid, r10 = procinfo
	 */
	bl	__vet_atags
#ifdef CONFIG_SMP_ON_UP
	bl	__fixup_smp
#endif
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
	bl	__fixup_pv_table
#endif
	bl	__create_page_tables

	/*
	 * The following calls CPU specific code in a position independent
	 * manner.  See arch/arm/mm/proc-*.S for details.  r10 = base of
	 * xxx_proc_info structure selected by __lookup_processor_type
	 * above.  On return, the CPU will be ready for the MMU to be
	 * turned on, and r0 will hold the CPU control register value.
	 */
	ldr	r13, =__mmap_switched		@ address to jump to after
									@ mmu has been enabled
	adr	lr, BSYM(1f)				@ return (PIC) address
	mov	r8, r4						@ set TTBR1 to swapper_pg_dir
	ldr	r12, [r10, #PROCINFO_INITFUNC]
	add	r12, r12, r10
	ret	r12
1:	b	__enable_mmu
ENDPROC(stext)

通过注释，我们可以知道，进入内核的前提是：MMU = off, D-cache = off, I-cache = dont care, r0 = 0, r1 = machine nr, r2 = atags or dtb pointer.MMU、D-cache关闭，I-cache随意，r0是0，ri保存正确的机械ID，r2保存设备树首地址（atags不知道啥）。
然后stext流程便是：

• 调用safe_svcmode_maskall ，进入svc模式，关闭所有中断；
• 调用__lookup_processor_type确定该内核与CPU是否兼容，兼容的话获取procinfo信息；
• 调用 __vet_atags 验证设备树；
• 调用__create_page_tables创建页表；
• 调用__mmap_switched函数，保存返回地址；
• 最后调用 __enable_mmu函数使能 MMC。

顺便提下__mmap_switched函数，因为它最终会调用start_kernel函数，代码在arch/arm/kernel/head-common.S中，内容如下：

__mmap_switched:
	adr	r3, __mmap_switched_data

	ldmia	r3!, {r4, r5, r6, r7}
	cmp	r4, r5				@ Copy data segment if needed
1:	cmpne	r5, r6
	ldrne	fp, [r4], #4
	strne	fp, [r5], #4
	bne	1b

	mov	fp, #0				@ Clear BSS (and zero fp)
1:	cmp	r6, r7
	strcc	fp, [r6],#4
	bcc	1b

 ARM(	ldmia	r3, {r4, r5, r6, r7, sp})
 THUMB(	ldmia	r3, {r4, r5, r6, r7}	)
 THUMB(	ldr	sp, [r3, #16]		)
	str	r9, [r4]			@ Save processor ID
	str	r1, [r5]			@ Save machine type
	str	r2, [r6]			@ Save atags pointer
	cmp	r7, #0
	strne	r0, [r7]			@ Save control register values
	b	start_kernel
ENDPROC(__mmap_switched)

在倒数第二行，调用了start_kernel函数，start_kernel函数定义在文件 init/main.c，它会调用很多函数完成Linux的启动工作，先附上代码，以后再细说：

asmlinkage __visible void __init start_kernel(void)
{
	char *command_line;
	char *after_dashes;

	/*
	 * Need to run as early as possible, to initialize the
	 * lockdep hash:
	 */
	lockdep_init();
	set_task_stack_end_magic(&init_task);
	smp_setup_processor_id();
	debug_objects_early_init();

	/*
	 * Set up the the initial canary ASAP:
	 */
	boot_init_stack_canary();

	cgroup_init_early();

	local_irq_disable();
	early_boot_irqs_disabled = true;

/*
 * Interrupts are still disabled. Do necessary setups, then
 * enable them
 */
	boot_cpu_init();
	page_address_init();
	pr_notice("%s", linux_banner);
	setup_arch(&command_line);
	mm_init_cpumask(&init_mm);
	setup_command_line(command_line);
	setup_nr_cpu_ids();
	setup_per_cpu_areas();
	smp_prepare_boot_cpu();	/* arch-specific boot-cpu hooks */

	build_all_zonelists(NULL, NULL);
	page_alloc_init();

	pr_notice("Kernel command line: %s\n", boot_command_line);
	parse_early_param();
	after_dashes = parse_args("Booting kernel",
				  static_command_line, __start___param,
				  __stop___param - __start___param,
				  -1, -1, &unknown_bootoption);
	if (!IS_ERR_OR_NULL(after_dashes))
		parse_args("Setting init args", after_dashes, NULL, 0, -1, -1,
			   set_init_arg);

	jump_label_init();

	/*
	 * These use large bootmem allocations and must precede
	 * kmem_cache_init()
	 */
	setup_log_buf(0);
	pidhash_init();
	vfs_caches_init_early();
	sort_main_extable();
	trap_init();
	mm_init();

	/*
	 * Set up the scheduler prior starting any interrupts (such as the
	 * timer interrupt). Full topology setup happens at smp_init()
	 * time - but meanwhile we still have a functioning scheduler.
	 */
	sched_init();
	/*
	 * Disable preemption - early bootup scheduling is extremely
	 * fragile until we cpu_idle() for the first time.
	 */
	preempt_disable();
	if (WARN(!irqs_disabled(),
		 "Interrupts were enabled *very* early, fixing it\n"))
		local_irq_disable();
	idr_init_cache();
	rcu_init();

	/* trace_printk() and trace points may be used after this */
	trace_init();

	context_tracking_init();
	radix_tree_init();
	/* init some links before init_ISA_irqs() */
	early_irq_init();
	init_IRQ();
	tick_init();
	rcu_init_nohz();
	init_timers();
	hrtimers_init();
	softirq_init();
	timekeeping_init();
	time_init();
	sched_clock_postinit();
	perf_event_init();
	profile_init();
	call_function_init();
	WARN(!irqs_disabled(), "Interrupts were enabled early\n");
	early_boot_irqs_disabled = false;
	local_irq_enable();

	kmem_cache_init_late();

	/*
	 * HACK ALERT! This is early. We're enabling the console before
	 * we've done PCI setups etc, and console_init() must be aware of
	 * this. But we do want output early, in case something goes wrong.
	 */
	console_init();
	if (panic_later)
		panic("Too many boot %s vars at `%s'", panic_later,
		      panic_param);

	lockdep_info();

	/*
	 * Need to run this when irqs are enabled, because it wants
	 * to self-test [hard/soft]-irqs on/off lock inversion bugs
	 * too:
	 */
	locking_selftest();

#ifdef CONFIG_BLK_DEV_INITRD
	if (initrd_start && !initrd_below_start_ok &&
	    page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) {
		pr_crit("initrd overwritten (0x%08lx < 0x%08lx) - disabling it.\n",
		    page_to_pfn(virt_to_page((void *)initrd_start)),
		    min_low_pfn);
		initrd_start = 0;
	}
#endif
	page_ext_init();
	debug_objects_mem_init();
	kmemleak_init();
	setup_per_cpu_pageset();
	numa_policy_init();
	if (late_time_init)
		late_time_init();
	sched_clock_init();
	calibrate_delay();
	pidmap_init();
	anon_vma_init();
	acpi_early_init();
#ifdef CONFIG_X86
	if (efi_enabled(EFI_RUNTIME_SERVICES))
		efi_enter_virtual_mode();
#endif
#ifdef CONFIG_X86_ESPFIX64
	/* Should be run before the first non-init thread is created */
	init_espfix_bsp();
#endif
	thread_info_cache_init();
	cred_init();
	fork_init();
	proc_caches_init();
	buffer_init();
	key_init();
	security_init();
	dbg_late_init();
	vfs_caches_init(totalram_pages);
	signals_init();
	/* rootfs populating might need page-writeback */
	page_writeback_init();
	proc_root_init();
	nsfs_init();
	cpuset_init();
	cgroup_init();
	taskstats_init_early();
	delayacct_init();

	check_bugs();

	acpi_subsystem_init();
	sfi_init_late();

	if (efi_enabled(EFI_RUNTIME_SERVICES)) {
		efi_late_init();
		efi_free_boot_services();
	}

	ftrace_init();

	/* Do the rest non-__init'ed, we're now alive */
	rest_init();
}

在start_kernel最后，调用了rest_init函数，rest_init函数也定义在文件 init/main.c中，这个不长：

static noinline void __init_refok rest_init(void)
{
	int pid;

	rcu_scheduler_starting();
	smpboot_thread_init();
	/*
	 * We need to spawn init first so that it obtains pid 1, however
	 * the init task will end up wanting to create kthreads, which, if
	 * we schedule it before we create kthreadd, will OOPS.
	 */
	kernel_thread(kernel_init, NULL, CLONE_FS);
	numa_default_policy();
	pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
	rcu_read_lock();
	kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns);
	rcu_read_unlock();
	complete(&kthreadd_done);

	/*
	 * The boot idle thread must execute schedule()
	 * at least once to get things moving:
	 */
	init_idle_bootup_task(current);
	schedule_preempt_disabled();
	/* Call into cpu_idle with preempt disabled */
	cpu_startup_entry(CPUHP_ONLINE);
}

它的流程是：

• 调用 rcu_scheduler_starting，启动 RCU锁调度器
• 调用 kernel_thread 创建 kernel_init进程，将kernel由内核态转到用户态
• 调用 kernel_thread 创建 kthreadd内核进程，此内核进程的 PID为 2。 kthreadd进程负责所有内核进程的调度和管理。
• 最后调用 cpu_startup_entry 进入 idle进程，idle线程说白了，和待机很像，让cpu一直干愣着，有任务它就把cpu交给其它进程。
  kernel_init函数用来管理init进程，代码如下：

static int __ref kernel_init(void *unused)
{
	int ret;

	kernel_init_freeable();
	/* need to finish all async __init code before freeing the memory */
	async_synchronize_full();
	free_initmem();
	mark_rodata_ro();
	system_state = SYSTEM_RUNNING;
	numa_default_policy();

	flush_delayed_fput();

	if (ramdisk_execute_command) {
		ret = run_init_process(ramdisk_execute_command);
		if (!ret)
			return 0;
		pr_err("Failed to execute %s (error %d)\n",
		       ramdisk_execute_command, ret);
	}

	/*
	 * We try each of these until one succeeds.
	 *
	 * The Bourne shell can be used instead of init if we are
	 * trying to recover a really broken machine.
	 */
	if (execute_command) {
		ret = run_init_process(execute_command);
		if (!ret)
			return 0;
		panic("Requested init %s failed (error %d).",
		      execute_command, ret);
	}
	if (!try_to_run_init_process("/sbin/init") ||
	    !try_to_run_init_process("/etc/init") ||
	    !try_to_run_init_process("/bin/init") ||
	    !try_to_run_init_process("/bin/sh"))
		return 0;

	panic("No working init found.  Try passing init= option to kernel. "
	      "See Linux Documentation/init.txt for guidance.");
}

• 调用 kernel_init_freeable 函数用于完成 init进程的一些其他初始化工作，下面会再说；
• 调用 async_synchronize_full 函数，等待List async_running与async_pending都清空后返回，用来加速Linux启动；
• 调用 free_initmem 函数，释放Linux Kernel有关内存，用于满足多媒体、中断等高需求；
• 调用 mark_rodata_ro 函数，标记内核数据只读；
• 调用 numa_default_policy 函数，恢复当前进程的内存策略为默认状态；
• 如果ramdisk_execute_command、execute_command为真，调用 run_init_process 函数 初始化用户进程，否则通过其它尝试初始化用户层。
  最后，看一下kernel_init_freeable()函数：

static noinline void __init kernel_init_freeable(void)
{
	/*
	 * Wait until kthreadd is all set-up.
	 */
	wait_for_completion(&kthreadd_done);

	/* Now the scheduler is fully set up and can do blocking allocations */
	gfp_allowed_mask = __GFP_BITS_MASK;

	/*
	 * init can allocate pages on any node
	 */
	set_mems_allowed(node_states[N_MEMORY]);
	/*
	 * init can run on any cpu.
	 */
	set_cpus_allowed_ptr(current, cpu_all_mask);

	cad_pid = task_pid(current);

	smp_prepare_cpus(setup_max_cpus);

	do_pre_smp_initcalls();
	lockup_detector_init();

	smp_init();
	sched_init_smp();

	do_basic_setup();

	/* Open the /dev/console on the rootfs, this should never fail */
	if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
		pr_err("Warning: unable to open an initial console.\n");

	(void) sys_dup(0);
	(void) sys_dup(0);
	/*
	 * check if there is an early userspace init.  If yes, let it do all
	 * the work
	 */

	if (!ramdisk_execute_command)
		ramdisk_execute_command = "/init";

	if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) {
		ramdisk_execute_command = NULL;
		prepare_namespace();
	}

	/*
	 * Ok, we have completed the initial bootup, and
	 * we're essentially up and running. Get rid of the
	 * initmem segments and start the user-mode stuff..
	 *
	 * rootfs is available now, try loading the public keys
	 * and default modules
	 */

	integrity_load_keys();
	load_default_modules();
}

• 调用 wait_for_completion 函数，等待 kthreadd_done 完成；
• 调用 set_mems_allowed 函数，初始化可在任何node分配到内存页；
• 调用 set_cpus_allowed_ptr 函数，设置cpu_bit_mask，限定task只在特定处理器上运行，使init进程能够在任意的cpu上运行；
• 调用 smp_prepare_cpus 函数，设定在编译核心时支援的最大CPU数量；
• 调用 do_pre_smp_initcalls 函数，遍历Symbol中部分函数，并调用do_one_initcall(fn)依次执行；
• 调用 do_basic_setup函数，完成 Linux下设备驱动初始化工作以及Linux下驱动模型子系统的初始化；
• 调用函数 prepare_namespace 函数，挂载根文件系统。

二、kernel移植

kernel移植只需要移植defconfig配置文件以及设备树文件即可，它们分别在arch/arm/configs、arch/arm/boot/dts下。复制完后，再在arch/arm/boot/dts的Makefile中添加设备树，复制的哪个就添加到哪个下面就行。
移植脚本，注移植的NXP的imx6ullevk：

#!/bin/bash

board=Xport_Alientek
BOARD=XPORT_ALIENTEK

# Adding a compilation script
touch ${board}_building.sh
chmod 777 ${board}_building.sh
echo '#!/bin/bash' > ${board}_building.sh
echo '' >> ${board}_building.sh
echo "make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- distclean" >> ${board}_building.sh
echo "make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- imx_${board}_emmc_defconfig" >> ${board}_building.sh
echo "make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- menuconfig" >> ${board}_building.sh
echo "make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- all -j8" >> ${board}_building.sh

cd arch/arm/configs
cp imx_alientek_emmc_defconfig imx_${board}_emmc_defconfig

cd ../../../arch/arm/boot/dts
cp imx6ull-alientek-emmc.dts imx6ull-${board}-emmc.dts

getline()
{
	cat -n Makefile|grep "imx6ull-${board}-emmc.dtb "|awk '{print $1}'
}
if [ `getline` > 0 ]
then
	echo The development board : $board already exists
else
	declare -i nline
	getline()
	{
		cat -n Makefile|grep "CONFIG_SOC_IMX6ULL) += "|awk '{print $1}'
	}
	getlinenum()
	{
		awk "BEGIN{a=`getline`;b="1";c=(a+b);print c}";
	}
	nline=`getlinenum`-1
	sed -i "${nline}a\	imx6ull-${board}-emmc.dtb "'\\' Makefile
	echo The new linux-kernel : $board is added
fi

标签：__,kernel,调用,init,command,2021,Linux,arm
来源： https://blog.csdn.net/qq_41535901/article/details/122446437

本站声明： 1. iCode9 技术分享网（下文简称本站）提供的所有内容，仅供技术学习、探讨和分享；
2. 关于本站的所有留言、评论、转载及引用，纯属内容发起人的个人观点，与本站观点和立场无关；
3. 关于本站的所有言论和文字，纯属内容发起人的个人观点，与本站观点和立场无关；
4. 本站文章均是网友提供，不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属；如您发现该文章侵犯了您的权益，可联系我们第一时间进行删除；
5. 本站为非盈利性的个人网站，所有内容不会用来进行牟利，也不会利用任何形式的广告来间接获益，纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。